Operating instructions

Selector dial .....

_M _ (phones)terminal

ENUbutton

H When using the built-in speaker; make sure that "_" is not displayed on the

screen When using the headphones, make sure that "_" is displayed Change

the setting as necessary following the procedure below

MENU([_44) [VCR SET UP I)_IAV/PHONES.,,AV _'_

1. Pressthe MENU button to open the menu.

2. Turn the selector dial to select [VCR SET UP] and

press the selector dial.

3. Turn the selector dial to select [AV/PHONES] and

press the selector dial.

4. Turn the selector dial to select [AV] or [PHONES _].

5. Press the MENU button to close the menu.

O The built-in speaker does not sound when "_" isdisplayed

O Do not connect headphones unless "_" isdisplayed as it produces noise

O The built-in speaker is monaural Use headphones for stereo sound

O The built-in speaker turns off when the camcorder is set to a mode other than

the PLAY(VCR) mode or when you use the headphones