User Manual

You can shoot movies while recording

sound with the built-in monaural

microphone or with a commercially-

available stereo microphone. You can

also freely adjust the sound-recording

level.

Set the sound recording with [z4:

Sound recording].

[Auto] : The sound-recording level is adjusted automatically. Auto

level control will operate automatically in response to the

sound level.

[Manual] : You can adjust the sound recording level to one of 64

levels. Select [Rec. level] and look at the level meter

while turning the <5> dial to adjust the sound-recording

level. While looking at the peak hold indicator (approx. 3

sec.), adjust so that the level meter sometimes lights up

the “12” (-12 dB) mark on the right for the loudest sounds.

If it exceeds “0”, the sound will be distorted.

[Disable] : Sound will not be recorded.

When set to [Enable], it reduces wind noise when there is wind

outdoors. This feature takes effect only with the built-in microphone.

Note that [Enable] will also reduce low bass sounds, so set this function

to [Disable] when there is no wind. It will record a more natural sound

than with [Enable].

3 Setting the Sound Recording

Sound Recording/Sound-Recording Level

Wind Filter

COPY