Instructions ENG
Thank you for purchasing a Canon product. Canon RF14-35mm F4 L IS USM is a wide zoom lens for use with EOS R series cameras. zz“IS” stands for Image Stabilizer. zz“USM” stands for Ultrasonic Motor. Conventions used in these instructions Warning to prevent lens or camera malfunction or damage. Supplementary notes on using the lens and taking pictures. Camera Firmware and Camera Applications Please use the latest versions of firmware and applications with the camera in use.
Safety Precautions Precautions to ensure that the camera is used safely. Read these precautions thoroughly. Make sure all details are observed in order to prevent risks and injury to the user and other people. Warning Details pertaining to risks that may result in death or serious injury. zz Do not look directly at the sun or other strong light sources through a lens. This may result in loss of sight. zz Do not leave a lens in the sun without the lens cap attached.
General Precautions Handling Precautions zz Do not leave the product in excessive heat such as in a car in direct sunlight. High temperatures can cause the product to malfunction. zz If the lens is taken from a cold environment into a warm one, condensation may develop on the lens surface and internal parts. To prevent condensation in this case, first put the lens into an airtight plastic bag before taking it from a cold to warm environment. Then take out the lens after it has warmed gradually.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.
Nomenclature Focusing ring (→ 7) Control ring (→ 8) Zoom ring (→ 7) Zoom position index (→ 7) Hood mount (→ 11) Rubber ring (→ 6) Filter mounting thread (→ 12) Contacts (→ 6) Focus mode switch (→ 7) Image stabilizer switch (→ 9) Lens mount (→ 6) Lens mount index (→ 6) zz For detailed information, reference page numbers are provided in parentheses (→ **).
1. Attaching and Detaching the Lens Lens mount index Lens release button Dust cap Attaching the Lens Align the lens mount indexes of the lens and camera, and turn the lens clockwise until you hear a click. Detaching the Lens Turn the lens counterclockwise while pressing the camera’s lens release button. Detach the lens once it has stopped turning. Please refer to the camera's instructions for details. zzSet the camera’s power switch to OFF when attaching or detaching the lens.
2. Setting the Focus Mode 3. Zooming Focusing ring To zoom, turn the lens’ zoom ring. Focus mode switch To shoot in autofocus (AF) mode, set the focus mode switch to AF. To use only manual focusing (MF), set the focus mode switch to MF, and focus by turning the focusing ring. zzBe sure to finish zooming before focusing. Zooming after focusing can affect the focus. zzBlurring may temporarily occur if the zoom ring is quickly turned. zzQuickly turning the focusing ring may result in delayed focus.
4. Control Ring The control ring can be assigned the functions that are commonly used with cameras, such as shutter speed and aperture settings. Control ring The click action of the control ring allows you to have a sense of how much it is being turned. Please refer to the camera’s instructions for details on how to use the control ring. zzThere are cases in which the sound of control ring operations may be recorded when shooting movies.
5. Image Stabilizer Set the image stabilizer switch to ON when you want to use the Image Stabilizer. zz This function provides image stabilization appropriate for shooting conditions (such as shooting still subjects and panning shots). zz The Image Stabilizer will work in combination with cameras with in-body Image Stabilizer. zz Set the image stabilizer switch to OFF when you are not going to use the Image Stabilizer.
Image Stabilizer The Image Stabilizer for this lens is suited to hand-held shots in the following conditions. zz In semi-darkened areas such as indoors or outdoors at night. zz In locations where the flash cannot be used, such as art museums and theater stages. zz In situations where your footing is uncertain. zz In situations where fast shutter speed settings cannot be used. zz Panning shots of vehicles, trains, etc.
6. Hood The custom lens hood reduces unwanted light that causes flare and ghosting and protects the front of the lens from rain, snow, and dust. Attachment position mark Red dot Button Red dot Attachment position mark Red dot Stop position mark Attaching the Hood Align the red attachment position mark on the hood with the red dot on the front of the lens, and then turn the hood in the direction of the arrow until you hear a click.
7. Filters (Sold separately) You can attach filters to the filter mounting thread on the front of the lens. zzOnly one filter may be attached. zzIf you need a polarizing filter, use the Canon Circular Polarizing Filter PL-C B. zzDetach the hood when adjusting the polarizing filter. 8. Close-up Lenses (Sold separately) Attaching a 500D (77 mm) Close-up Lens enables close-up photography. Compatibility with Close-up Lenses is as follows. zz Can be used at the 35 mm end (magnification 0.41x - 0.
Specifications Focal Length/Aperture Lens Construction Maximum Aperture Minimum Aperture Angle of View Min. Focusing Distance Max. Magnification Field of View Filter Diameter Max. Diameter and Length Weight Hood Lens Cap Case 14-35mm f/4 12 groups, 16 elements f/4 f/22 Horizontal: 104°- 54°, Vertical: 81°- 38°, Diagonal: 114°- 63° 0.2 m/0.66 ft. 0.38x (at 35 mm) Approx. 230 x 153 - 94 x 63 mm/ 9.06 x 6.02 - 3.70 x 2.48 in. (at 0.2 m/0.66 ft.) 77 mm Approx. 84.1 x 99.8 mm/3.31 x 3.93 in. Approx. 540 g/19.
Specifications zz The lens length is measured from the lens mount surface to the front end of the lens. Add 24.2 mm/0.95 in. when including the lens cap and dust cap. zz The size and weight listed are for the lens only. zz You cannot use extenders. zz This lens cannot be used for multiple exposure shooting. zz There are cases in which using the zoom function during continuous shooting may result in conspicuous image distortion. zz All data listed is measured according to Canon standards.
CT1-D186-A 0321Ni © CANON INC.
111111111111111111~ CT1-B071-A CANON INC. 2018 CT1B071A Canon PRINTED IN JAPAN Canon Interchangeable Lens Instructions These instructions describe Important safety notes for Canon Interchangeable lenses* and basic Instructions on how to handle those lenses. For more detailed Information, refer to the Instructions for each lens. Instructions for your tens can be downloaded from the Canon website below: *EF (EF-S) lenses, EF-M lenses, RF lenses (j) http://www.canon.
RF14-35mm F4 L IS USM Specifications Lens Focal Length 14-35mm Maximum and Minimum Aperture F4-F22 (at all zoom settings) Lens Mount Type RF Mount; Metal Mount Minimum Focusing Distance 7.9 in. (0.2m), at all zoom settings Maximum Magnification 0.38x, at 35mm zoom setting • Fill frame with subject approx. 3.7 x 2.
Maximum Outer Diameter x Length Approx. ø3.3 in. x 3.9 in. (approx. ø84.1mm x 99.8mm) • Minimum length at approx. 22mm zoom position • Maximum length at 35mm zoom position — approx. 4.25 in. / 107.9mm Weight Approx. 1.2 lb. (approx. 19.0 oz.
-· . .,, .. ·Oea·1ej~:Record ·q(·c a·non P·urc_ h_c1se Fiche:_ d?Achat our Concessionnairif Canon Canon - ~ - . -- - .._,,r , • - - .- - - - .- . J • - , 111111 CT18017A Complete this card at time of sale.
Canon I cANoN LIMITED wARRANTv CANON U.S.A., INC. CANON CANADA INC. NAME NOM ADDRESS ADRESSE CITY VILLE POSTAL CODE CODE POSTAL PROVINCE THESE ARE NOT REGISTRATION CARDS - Retain for your Records CES CARTES NE SONT PAS CELLES POUR l..'.ENREGISTREMENT. - Les conserver comme reference. DEALER'S NAME & ADDRESS MARCHAND NOM & ADRESSE MODEL MODELE RF14-35/4 L IS USM BODY NO. BOITIER NO 1003000319 PURCHASE DATE DATE D'ACHAT CT1-B017-A 0621Ni48.
Ca11011 CANON®EF Lens and Accessories Limited WarrantyFor U.S.A. & Canada Only The limited warranty set forth below is given by Canon U.S.A., Inc. (Canon U.S.A.) in the United States or Canon Canada, Inc. (Canon Canada) in Canada with respect to the Canon brand EF Lens, as well as with respect to the accessories packaged with this limited warranty (collectively the •Products"), when purchased and used in the United States or Canada.
Register Now! Visit www.registercanon.com to register your new EF & EF-S Lenses today and receive the following: • • • • I Telephone support* E-mail support* Product protection* Receive information on new products and promotions* There is no charge to register or for the benefits offered. * These benefits valid in the U.S. only. Please read the Terms and Conditions at www.registercanon.com for complete details. For accessories and other supplies visit www.estore.usa.canon.
des objectifs EF et des accessoires de CANON®Cauo11 Garantie limitee Pour les Etats-Unis et le Canada seulement al'egard des obfedils EF de m81que Canon, des acx:essoires livres avec cette garantie llmitee (coUectivement les .. produits "), lorsqu'ils sont achetes et utilises aux Etats-Unis ou au Canada. Les produrts sont les seuls auxquels cette garanbe limitee s'applique. La presente garanlie llmrtee est fournie par Canon U.S.A., Inc. (Canon U.S.A.) aux Etats-Unis ou Canon Canada, Inc.
Canon U.S.A. You may obtain technical support for your Products as follows: • Internet support at www.usa.canon.com/support (E-mail support also available) • Telephone assistance from a Canon U.S.A. Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666). Canon Canada You may obtain technical support for your Products as follows: • Internet support for English at www.canon.