Owner's Manual
Table Of Contents
- Pocket Guide
- Owners Manual
- Conventions Used in This Manual
- Table of Contents
- Quick Start
- Supplied Accessories
- Parts & Controls
- Getting Started
- Attaching the Strap
- Charging the Battery
- Installing / Removing the Battery
- Power On
- Installing & Removing a CF Card
- Mounting & Detaching a Lens
- Lens Image Stabilizer
- Basic Operation
- Using the Quick Control Screen
- Menu Operations
- Setting the Language
- Date & Time Set
- Formatting a CF Card
- Auto Power-Off
- Restore Default Settings
- Displaying the Grid and Electronic Level
- Basic Shooting
- Image Settings
- Setting the Auto Focus & Drive Modes
- Advanced Operations
- Live View Shooting
- Shooting Movies
- Image Playback
- Sensor Cleaning
- Printing Images
- Customizing the Camera
- Checking Camera Settings
- Checking Battery Information
- Optional Accessories
- Replacing Date / Time Battery
- Function Availability Table
- Menu Settings
- Troubleshooting
- Error Codes
- System Map
- Specs
- Index
- Software Information
- Warranty
W3mJ
Manual Sensor Cleaning"*
o
~
While cleaning the sensor, never do any
of
the following. Doing any
of
the following will cut off the power and close the shutter. The
shutter curtains and
image sensor might get damaged.
• Setting the power switch to
<
OFF>.
• Opening the battery compartment cover.
• Opening the card slot cover.
~
The surface
of
the image sensor is extremely delicate. Clean the sensor
with care.
~
Use a plain blower without any brush attached. A brush can scratch the
sensor.
$ Do not insert the blower tip inside the camera beyond the lens mount. If
the power is turned off, the shutter will close and the shutter curtains or
reflex mirror might get damaged.
~
Never use canned air or gas to clean the sensor. The blowing force can
damage the sensor or the spray gas can freeze on the sensor.
.
~
If smear that cannot be removed with a blower remains, having the
sensor cleaned by a Canon Service Center is recommended.
188