User's Manual
Table Of Contents
- Contents
- Important Safety Instructions
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Logging in to the Machine
- Loading Paper
- Loading Paper in the Paper Drawer
- Loading Paper in the Multi-Purpose Tray
- Loading Envelopes
- Loading Preprinted Paper
- Specifying Paper Size and Type
- Specifying Paper Size and Type in the Paper Drawer
- Specifying Paper Size and Type in the Multi-Purpose Tray
- Registering Default Paper Settings for the Multi-Purpose Tray
- Registering a Custom Paper Size
- Limiting the Paper Sizes Displayed
- Automatically Selecting an Appropriate Paper Source for Each Function
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Sleep Mode
- Using a USB Memory Device
- Printing
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting (FAQ)
- Appendix
- SIL OPEN FONT LICENSE
Restarting the Machine
524X-023
Depending on the setting items that have been changed, you may need to mak
e the changes effective by restarting
the machine. This section describes how to restart the machine.
Restarting the Machine by an Operation on the Main Unit(P. 105)
Restarting the Machine by Remote Operation(P. 105)
Restarting the Machine by an Operation on the Main Unit
1
Press the power switch.
● It may tak
e some time for the machine to completely shut down.
➠ When the machine shuts down, the display or Energy Saver key of the operation panel turns off.
2
Wait at least 10 seconds after the shutdown, then press the power switch again.
➠ The machine starts.
Restarting the Machine by Remote Operation
1
Start the Remote UI and log in to System Manager Mode.
Starting Remote
UI(P
. 270)
2
Click [Settings/Registration] on the Portal page.
Remote UI Screen(P. 271)
3
Click [Restart Device] in the menu on the left side of the screen.
Basic Operations
105