User's Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Placing Originals
- Loading Paper
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Quiet Mode
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Registering Destinations from Remote UI
- Saving/Loading Address Book from Remote UI
- Importing/Exporting Address Book Data with the Supplied Software
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Installation/Settings Problems
2KUU-08J
See Common Problems(P. 468) also.
Problems with the Wireless/Wired LAN Connection(P. 469)
Problem with the USB Connection(P. 472)
Problem with the Print Server(P. 472)
Problems with the Wireless/Wired LAN Connection
The wireless LAN and wired LAN cannot be connected at the same time.
● The wireless LAN and wired LAN cannot be connected at the same time. The following can be used at the
same time: a USB cable and a wireless LAN, or a USB cable and a wired LAN.
Remote UI is not displayed.
● Are <Use HTTP> and <Use Remote UI> set to <On>?
Disabling HTTP Communication(P. 333)
Disabling Remote UI(P. 334)
● If the machine is connected to a wir
eless LAN on a touch panel model, check that the Wi-Fi icon is displayed
in the Home screen and that the IP address is set correctly, and then start the Remote UI again.
Home Screen(P. 112)
Viewing Network Settings(P. 39)
● If the machine is connected to a wir
ed LAN, check that the cable is connected rmly and the IP address is set
correctly, and then start the Remote UI again.
Connecting to a Wired LAN(P. 18)
Viewing Network Settings(P. 39)
● Ar
e you using a proxy server? If so, add the machine's IP address to the [Exceptions] list (addresses that do
not use the proxy server) in the Web browser's proxy settings dialog.
● Is communication not limited by the rewall on your computer? If IP addresses are or an MAC address is
incorrectly entered, the Remote UI cannot be displayed. In that case, you need to use the operation panel to
set <IPv4 Address Filter>, <IPv6 Address Filter>, or <MAC Address Filter> to <Off>.
Restricting Communication by Using Firewalls(P. 300)
<IPv4 Address Filter>(P. 423)
<IPv6 Address Filter>(P. 423)
<MAC Address Filter>(P. 424)
A connection to a network cannot be established.
● The IP addr
ess may not be set correctly. Set the IP address again.
Setting IP Addresses(P. 32)
● When you connect the machine to a computer via wir
eless LAN, check whether the machine is properly
installed and ready to connect to the network.
When the Machine Cannot Connect to the Wireless LAN(P. 470)
Troubleshooting
469