User's Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Placing Originals
- Loading Paper
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Quiet Mode
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Registering Destinations from Remote UI
- Saving/Loading Address Book from Remote UI
- Importing/Exporting Address Book Data with the Supplied Software
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Setting Up Connection by Specifying Detailed Settings
2KUU-00F
If you want to specify the security settings in detail or cannot establish the wir
eless connection using the other
procedures, manually enter all the required information for the wireless LAN connection. Before specifying detailed
settings, check and write down the required information, including the SSID, network key, and wireless security
protocols.
Checking the SSID and Network Key(P. 31)
1
Display the <Menu> screen.
Home Screen(P. 112)
Touch Panel Model
Select <Menu> in the Home scr
een.
5 Lines LCD Model
Press
.
2
Select <Network Settings>.
● If the scr
een for entering a PIN appears, enter the correct PIN.
Setting the System Manager PIN(P. 294)
3
Select <Wireless LAN Settings>.
● If the <Do you want to enable the wireless LAN?>/<Enable the wireless LAN?> message is displayed, select
<Yes>.
● If the <Direct Connection will be terminated. Is it OK?> message is displayed, select <Yes>.
4
Read the message that is displayed, and select <OK>.
5
Select <SSID Settings>
<Enter Manually>.
6
Enter the SSID that you have written down.
● Enter the SSID
, and select <Apply>.
● On how to enter text, see
Entering Text(P. 124) .
7
Specify the security settings based on the information that you have written down.
● If you do not need to specify the security settings, select <None>.
Setting Up
28