User's Manual
Table Of Contents
- Contents
- Setting Up
- Main Functions
- Preparations Required Before Use
- Preventing Unauthorized Access
- Setting Up Using the Setup Guide
- Setting the Date/Time
- Setting Up the Network Environment
- Installing Drivers
- Configuring Initial Settings for Fax Functions
- Configuring Scan Settings
- Basic Operations
- Parts and Their Functions
- Turning ON the Machine
- Using the Operation Panel
- Placing Originals
- Loading Paper
- Customizing the Display
- Changing the Default Settings for Functions
- Setting Sounds
- Entering Quiet Mode
- Entering Sleep Mode
- Registering Destinations
- Copying
- Faxing
- Printing
- Scanning
- Linking with Mobile Devices
- Managing the Machine
- Setting Access Privileges
- Configuring the Network Security Settings
- Restricting the Machine's Functions
- Managing the Machine from a Computer (Remote UI)
- Registering Destinations from Remote UI
- Saving/Loading Address Book from Remote UI
- Importing/Exporting Address Book Data with the Supplied Software
- Updating the Firmware
- Initializing Settings
- Setting Menu List
- Maintenance
- Troubleshooting
- Appendix
- SIL OPEN FONT LICENSE
Connecting Directly (Access Point Mode)
2KUU-05J
Even in an envir
onment without a wireless LAN router, using "Access Point Mode," which can directly connect a mobile
device to the machine wirelessly, enables you to connect the mobile device on hand to the machine without dicult
settings.
Preparing for Direct Connection (Access Point Mode)(P. 270)
Connecting Directly (Touch Panel Model)(P. 271)
Connecting Directly (5 Lines LCD Model)(P. 271)
Preparing for Direct Connection (Access Point Mode)
Establish a connection by using Access Point Mode in the following order (only for IPv4 environment).
Preparing the mobile device
● Congur
e settings to connect the mobile device to Wi-Fi.
Put the machine into the connection standby status.
● <Menu> ( ) <Network Settings> <Direct Connection Settings> set <Use
Dir
ect Connection> to <On>.
Specifying the value for time until auto termination
● Y
ou can specify the time to automatically establish a disconnection when the direct connection is enabled.
<Time Until Direct Connection Termination>(P. 366)
Connecting multiple mobile de
vices at the same time
● Congure the machine's SSID and network key arbitrarily. The network key can be left blank.
<Access
Point Mode Settings>
(P. 366)
Changing the IP address for direct connection
● The IP address for direct connection is set automatically. You can also set any IP address.
<IP Address
Settings for Dir
ect Conn.>(P. 366)
Linking with Mobile Devices
270