User's Manual

Updating the Firmware
2KUU-078
For the rmwar
e, select the method of update depending on the installation condition of the machine. There are two
methods of update: the one is to access the latest rmware version on the Internet from the machine and perform the
update if the version currently installed in the machine is not the latest, and the other is to access the latest rmware
version on the Internet from a computer and perform the update from the computer if the version currently installed
in the machine is not the latest. In an environment where connection to the Internet cannot be established via a
wireless LAN, establish connection via a wired LAN or USB and perform the update from the computer.
Installation Condition of the Machine How to Install the Update
Wireless LAN connection Updating via the Internet(P. 356)
Wired LAN connection Updating via the Internet(P. 356)
Updating from a Computer(P. 357)
USB connection Updating from a Computer(P. 357)
● If you ar
e in an IPv6 environment, you cannot perform rmware update. Use USB to re-establish connection,
and perform the update from the computer.
Checking the rmwar
e version
● You can check the rmware version from the operation panel of the machine. After completion of the
rmware update operation, make sure that the update was performed correctly.
Checking the Firmware
V
ersion(P. 357)
Updating via the Internet
Y
ou can access the Canon server from the machine to update the rmware to the latest version.
1
Display the <Menu> screen.
Home Screen(P. 112)
Touch Panel Model
Select <Menu> in the Home scr
een.
5 Lines LCD Model
Press
.
2
Select <System Management Settings>.
● If the scr
een for entering a PIN appears, enter the correct PIN.
Setting the System Manager PIN(P. 294)
3
Select <Update Firmware>.
Managing the Machine
356