User Manual

Table Of Contents
95
A Fully Automatic Shooting (Scene Intelligent Auto)
4
Take the picture.
Press the shutter button completely to
take the picture.
X The captured image will be displayed
for approx. 2 sec. on the LCD
monitor.
The focus indicator <o> blinks and focus is not achieved.
Aim the Area AF frame over an area with good contrast, then press
the shutter button halfway (p.56). If you are too close to the subject,
move away and shoot again.
Even when focus is achieved, the AF points do not light up in
red.
The AF points light up in red only when focus is achieved in low light
or with a dark subject.
Multiple AF points light up simultaneously.
Focus has been achieved at all those points. You can take the
picture as long as an AF point covering the target subject is lighting
up.
FAQ
The <A> mode makes the colors look more impressive in nature,
outdoor, and sunset scenes. If you do not obtain the desired color tones,
change the mode to a Creative Zone mode (p.36) and select a Picture
Style other than <D>, then shoot again (p.176).
By pressing the <Q> button, you can use Quick Control for [Drive
mode] and [AF point selection]. For the setting procedures, refer to
those for the <C> mode described on pages 100-104.