User Manual

Table Of Contents
520
You can power the camera with a household power outlet by using the
DC Coupler DR-E6 and AC Adapter AC-E6N (each sold separately).
1
Place the cord in the groove.
Carefully insert the DC coupler’s cord
into the groove without damaging the
cord.
2
Insert the DC coupler.
Open the battery compartment cover
and open the DC coupler cord hole
cover.
Insert the DC coupler securely until it
locks and put the cord through the
hole.
Close the cover.
3
Connect the DC coupler to the AC
adapter.
Connect the DC coupler’s plug to the
AC adapter’s connector securely.
4
Connect the power cord.
Connect the power cord to the AC
adapter and insert the power plug into
a power outlet.
5
Set the camera’s power switch to
<1>
(p.47).
Using a Household Power Outlet
DC coupler cord hole