User Manual

Table Of Contents
414
p Setting Ratings
You can rate all the images in a folder or on a card at once.
Under [32: Rating], when you select
[All images in folder] or [All images on
card], all the images in the folder or on
the card will be rated.
Turn the <6> dial to select a rating,
then select [OK].
When you are not rating images or
cancelling the rating, select [OFF].
If the search conditions are set with [32: Set image search
conditions] (p.402), the display will change to [All found images].
If you select [All found images], all the
found images filtered by the search
conditions will be rated as specified.
3 Rating All Images in a Folder or on a Card
On the step 4 screen on page 412, the number next to the rating mark goes
up to only three digits (max. 999). If there are 1000 or more images with a
given rating, “###” will be displayed.
Taking Advantage of Ratings
With [32: Set image search conditions] and [32: Image jump w/
6], you can display only the images given a specific rating.
Depending on the computer’s operating system, you can see each file’s
rating as part of the file information display or in the provided, standard
image viewer (JPEG images only).