User Manual

Table Of Contents
203
3 Correction of Lens Aberrations due to Optical CharacteristicsN
1
Select [Diffraction correction].
2
Select [Enable].
Select [Enable], then press <0>.
3
Take the picture.
The image will be recorded with the
diffraction corrected.
Diffraction Correction
Depending on shooting conditions, noise may be intensified together
with the effects of correction.
The higher the ISO speed, the lower the correction amount will be.
For movie shooting, [Diffraction correction] will not appear. (Correction
is not possible.)
With “Diffraction correction”, degraded resolution due to the low-pass filter,
etc. is corrected in addition to diffraction. Therefore, correction is effective
even at an aperture close to the open aperture.