User Manual

431
L Erasing Images
By adding checkmarks <X> to the images to be erased, you can erase
all those images at once.
1
Select [Erase images].
Under the [31] tab, select [Erase
images], then press <0>.
2
Select [Select and erase images].
X An image will be displayed.
3
Select the image to be erased.
Turn the < 5 > dial to select the image
to be erased, then press <
0 >.
X A checkmark [X] will be displayed on
the upper left of the screen.
If you press the <u> button and turn
the <6> dial counterclockwise, you
can select an image from a three-
image display. To return to the single-
image display, turn the dial clockwise.
To select another image to be erased,
repeat step 3.
4
Erase the image.
Press the <L> button, then press
[OK].
X The selected images will be erased at
once.
3 Checkmarking [X] Images to Be Erased in a Batch
Under [32: Set image search conditions], if [Protect] is set to [Enable],
[31: Erase images] cannot be selected.