User Manual

Table Of Contents
257
w: HDR (High Dynamic Range) ShootingN
When shooting HDR images with [Auto Image Align] set to [Enable],
AF point display information (p.397) and Dust Delete Data (p.452) will
not be appended to the image.
If you perform handheld HDR shooting with [Auto Image Align] set to
[Enable], image periphery will be slightly trimmed and resolution will be
slightly lowered. Also, if the images cannot be aligned properly due to
camera shake, etc., auto image alignment may not take effect. Note that
when shooting with excessively bright (or dark) exposure settings, auto
image alignment may not work properly.
If you perform handheld HDR shooting with [Auto Image Align] set to
[Disable], the 3 images may not be properly aligned and the HDR effect
may be reduced. Using a tripod is recommended.
Auto image alignment may not function properly with repetitive patterns
(lattice, stripes, etc.) or flat, single-tone images.
The color gradation of the sky or white walls may not be reproduced
correctly. Irregular colors, irregular exposure or noise may appear.
HDR shooting under fluorescent or LED lighting may result in unnatural
color reproduction of the illuminated areas.
With HDR shooting, the images will be merged, then saved to the card,
so it may take some time. During the processing of the images, “buSY
will be displayed in the viewfinder and on the LCD panel, and you cannot
take another picture until the processing is complete.
If you set HDR shooting and then switch to movie shooting, the HDR
shooting setting may be canceled (the [Adjust dyn range] setting may
be changed to [Disable HDR]).