User Manual

140
AF Area Selection Mode
The AF area is divided into three focusing zones (left, center, and right)
for focusing. Since the focusing area is larger than with Zone AF and all
the AF points in the selected zone are used for Automatic selection AF,
it is superior to Single-point AF in tracking the subject, and it is effective
for moving subjects.
However, since it is inclined to focus on the nearest subject, focusing on
a specific target may be more difficult.
The AF point(s) achieving focus is displayed as <S>.
The Area AF frame (entire AF area) is used to focus. The AF point(s)
achieving focus is displayed as <S>.
With One-Shot AF, pressing the shutter button
halfway will display the AF point(s) <S> that
achieved focus. If multiple AF points are
displayed, it means they all have achieved focus.
This mode tends to focus on the nearest subject.
With AI Servo AF, you can set the AI Servo AF’s
initial position with [8C.Fn II-11: Initial AF pt,
AI Servo AF] set to [1: Initial AF pt
selected] or [2: Manual S AF pt] (p.484). As
long as the Area AF frame can track the subject
during shooting, focusing will continue.
Large Zone AF (Manual selection of zone)
Automatic selection AF