Owner's Manual

Table Of Contents
141
Responding to Error Messages
What to check on the camera
On the camera, does the DNS servers IP address setting
match the server’s actual address?
Set the IP address to [Manual setting]. Then, on the camera, set
the IP address that matches the address of the DNS server used
(p.156, 161).
What to check on the DNS server
Is the power of the DNS server on?
Turn on the DNS server.
Are the DNS server settings for IP addresses and the
corresponding names correct?
On the DNS server, make sure IP addresses and the
corresponding names are entered correctly.
Is the DNS server working correctly?
Check the DNS server settings to make sure the server is working
correctly as a DNS server.
If applicable, ask your network administrator to ensure the DNS
server is available.
What to check on the network as a whole
Does the network that you are trying to connect to via Wi-Fi
include a router or similar device that serves as a gateway?
If applicable, ask your network administrator for the network
gateway address and enter it on the camera (p.156, 161).
Make sure that the gateway address setting is correctly entered on
all network devices including the camera.
22: No response from DNS server