Owner's Manual

53
By touching an NFC-compatible smartphone to the camera while
playing back an image on the camera, you can establish a Wi-Fi
connection automatically and send the image to the smartphone even if
a Bluetooth or Wi-Fi connection has not been established beforehand.
 On the [Wi-Fi settings] screen, set [Wi-Fi] to [Enable] and set [NFC
connection] to [Enable] in advance (p.12).
 For the smartphone’s Wi-Fi setting, NFC setting, and NFC antenna
position, refer to the smartphone’s instruction manual.
1
Play back the image.
 Press the <3> button to play back
images.
2
Touch a smartphone to the
camera.
 Touch the p mark on the smartphone
to that on the camera so that they
come into contact with each other.
 When a message indicating the
established connection is displayed
on the camera’s LCD monitor, move
the smartphone away.
3
Select the images to send.
 Select and send image(s). For
information on how to send images,
see page 35.
 When the index display is selected in
step 1, the multiple image selection
screen will appear. See step 3 on
page 36.
 When the transfer is complete, the
screen for step 3 will reappear.
Sending Images from the Camera to a Smartphone