Owner's Manual

Troubleshooting Guide
464
 It is the highlight alert (p.389). Overexposed areas with clipped
highlight will blink.
 If the image is protected, it cannot be erased (p.372).
 Movies edited with a computer cannot be played back with the
camera.
 If you operate the camera’s dials or lens during movie shooting, the
operation sound will also be recorded. Using the Directional Stereo
Microphone DM-E1 (sold separately) is recommended (p.313).
 If there is a drastic change in the exposure level during autoexposure
movie shooting, the recording will stop momentarily until the
brightness stabilizes. In such a case, shoot in the <a> mode (p.280).
 Make sure the [53: Video system] is correctly set to [For NTSC] or
[For PAL] (depending on the video system of your TV set).
 Make sure the HDMI cable’s plug is inserted all the way in (p.369).
Playback Problems
Part of the image blinks in black.
The image cannot be erased.
The movie cannot be played back.
Operation sound and mechanical sound can be
heard during movie playback.
The movie appears to freeze momentarily.
No picture on the TV set.