Owner's Manual

Table Of Contents
256
You can select the AF (autofocus) operation characteristics to suit the
shooting conditions or subject. In Basic Zone modes, the optimum AF
operation is set automatically for the respective shooting mode.
1
Press the <Q> button.
The Quick Control screen will appear.
2
Select [X].
Press the <W> <X> keys to select
[X] (AF operation) on the left
side of the screen.
3
Select the AF operation.
Press the <Y> <Z> keys to select
the desired AF operation, then press
<0>.
X: One-Shot AF
K: Servo AF
4
Focus on the subject.
Aim the AF point over the subject and
press the shutter button halfway. The
camera will then autofocus in the
selected AF operation.
Changing the Autofocus OperationN
Settable only for Live View shooting (not settable for movie shooting).
If focus cannot be achieved, the AF point will turn orange. If this occurs,
the picture cannot be taken even if the shutter button is pressed
completely. Recompose the shot and try to focus again. Or, see
“Shooting Conditions that Make Focusing Difficult” (p.266).