User Manual

3
Specify the IP address, subnet mask, and gateway address (or default gateway).
● Select the item to set, press , enter an address, and press .
How to enter addresses
● Use
/ to move to the target eld (a period-delimited input ar
ea), and use the numeric k
eys to
increase/decrease the value.
When you are unsure of the IP address to input
● The IP address can be determined from the router settings of the network.
Determining the IP
Address to Assign to the Machine(P
. 153)
5
Perform a hard reset.
Performing a Hard Reset(P. 466)
➠ The settings are enabled after the har
d reset is performed.
Checking whether the settings are correct
● Make sur
e that the Remote UI screen can be displayed with your computer.
Starting Remote UI(P. 286)
If you have changed the IP address after installing the printer driver
● Y
ou need to specify the port to use again. For the port changing procedure, see the manuals for the relevant
drivers on the online manual website.
Determining the IP Address to Assign to the Machine
When you want to use a xed IP addr
ess for the machine, you can determine the IP address as shown below.
◼ T
o Determine the IP Address
An IP addr
ess consists of four numbers delimited by a period (.) (example: 192.168.1.45). Each number must be
in the range from 0 to 255. In general, set the rst three numbers to be the same as those for the router
because they are common in the network. Determine the last number (for example, 45 in 192.168.1.45) that is
different from that for other devices.
Network
153