Owners manual

104
Chapter 5 Administrator Settings
• Authentication Server: Device
The authentication method for all newly registered users
is “Device”, and user authentication is performed on the
ScanFront (device).
Hint
For users logged in from an authentication server account and
automatically registered, the authentication method is the
domain name of the authentication server.
• User name/Password
Enter the name and password to use for logging in to the
ScanFront.
• Password(confirmation)
Enter the same password again for confirmation.
• Mail Address
Enter the sender address for e-mail sent from the
ScanFront.
• SMTP/POP Before SMTP Authentication
This is displayed when (see p. 130). Enter the user name
and password that will be used for authentication by the
mail server.
IMPORTANT
• If the user name is set to be included in the index file and the
file format of the index file is set to XML, characters that
cannot be used in XML cannot be used in the user name.
• Confirm the user name and password with the user before
entering them. Otherwise, have the user enter them directly
in (see p. 146) of the user settings.
• Default Address Book screen
Select whether to display [My Address Book] or [Shared
Address Book] when opening the [Address selection]
screen from the [Home screen].
• Default Job Button screen
Select whether to display "My Job Button" or "Shared
Job Button" when the Job Button Screen is displayed
after login.
• Screen after Login
Select “Home screen” or “Job Button List screen” for the
initial screen displayed after the user logs in.
IMPORTANT
The setting for the initial screen after login also affects which
screen appears after a scanned image is sent. (See “Send
Settings” on p. 84.)
• Custom file name
Display the Custom file name Settings screen. (See
“Custom File Name Settings” on p. 105.)
• Index Settings
Display the Index settings screen. (See “Index Settings”
on p. 106.)