User Manual
Table Of Contents
- EOS-1D X Mark II
- Introduction
- Getting Started
- Charging the Battery
- Installing and Removing the Battery
- Installing and Removing the Card
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Operation
- Quick Control for Shooting Functions
- Menu Operations
- Before You Start
- Displaying the Grid in the Viewfinder
- Displaying the Electronic Level
- Setting the Viewfinder Information Display
- Help
- Setting the AF and Drive Modes
- Image Settings
- Selecting the Card for Recording and Playback
- Setting the Image-Recording Quality
- Setting the ISO Speed for Still Photos
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Setting the White Balance
- Custom White Balance
- Setting the Color Temperature
- White Balance Correction
- Auto Correction of Brightness and Contrast
- Setting Noise Reduction
- Highlight Tone Priority
- Correction of Lens Aberrations
- Reducing Flicker
- Setting the Color Space
- Creating and Selecting a Folder
- Changing the File Name
- File Numbering Methods
- Setting Copyright Information
- GPS Settings
- Exposure Control for Photographic Expressions
- Flash Photography
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Image Playback
- Image Playback
- INFO. Shooting Information Display
- Searching for Images Quickly
- Magnifying Images
- Rotating the Image
- Protecting Images
- Setting Ratings
- Recording and Playing back Voice Memos
- Quick Control for Playback
- Enjoying Movies
- Playing Back Movies
- Editing a Movie’s First and Last Scenes
- Grabbing a Frame from 4K Movies
- Slide Show (Auto Playback)
- Viewing Images on a TV Set
- Copying Images
- Erasing Images
- Changing Image Playback Settings
- Post-Processing Images
- Sensor Cleaning
- Transferring Images to a Computer and Print Ordering
- Customizing the Camera
- Reference
- Software Overview
483
You can power the camera with a household power outlet by using the
DC Coupler DR-E19 and AC Adapter AC-E19 (both sold separately).
1
Insert the DC coupler.
Insert the DC coupler firmly all the way
into the camera, and turn the release
handle as shown by the arrow.
2
Connect the DC coupler to the AC
adapter.
Securely connect the DC coupler’s
connector to the AC adapter’s connector.
3
Connect the power cord.
X
The AC adapter’s power lamp will light.
Connect the power cord to the AC
adapter and insert the power plug into
a power outlet.
4
Set the camera’s power switch to
<1> (p.53).
Using a Household Power Outlet
Disconnect button
Power lamp
Do not use an AC adapter other than the AC-E19 (sold separately).
Since the DC coupler and AC adapter are not water-resistant, do not get
them wet.
While the camera’s power switch is on, do not connect or disconnect the
power cord or connector or disconnect the DC coupler.
If the camera’s power switch is on and you do steps 2 and 3, it may take
a while before the camera turns on.
After using the camera, unplug the power plug from the power outlet.
To disconnect the connector, hold down the disconnect button and pull
the connector.
You can also use AC Adapter Kit ACK-E4.