Instruction Manual

REGULATING THE MINIMUM FLAME
After lighting the burners, turn the control knob to the minimum setting and then remo-
ve the knob (this can easily be removed by apply a gentle pressure).
Using a small «Terminal» type screwdriver the regulating screw can be adjusted as in
Fig. 7. Turning the screw clockwise reduces the gas flow, whilst turning it anticlockwise
increases the flow – Use this adjustment to obtain a flame of approximately 3 to 4 mm
in length and then replace the control knob.
When the gas supply available is LPG (Bottle gas)- the screw to set the idle flame must
be turned (clockwise) to the end stop.
Screws regulating (for differend models)
44
Fig.7
43
ADAPTING THE HOB TO DIFFERENT TYPES OF GAS
To adapt the Hob for use with different types of gas, carry out the following instructions:
— remove the grids and burners
— insert on hexagonal spanner (7 mm) into the burner support (Fig. 6)
— unscrew the injector and replace it with one suitable for the gas to be used (see
Table of gas consumption)
1/2 GAS
CONICAL
A) As illustrated, as-
semble parts in se-
quence:
A) fixed pipe
B) washer
C) Elbow fitting with
tapered thred
connection
2) Tighten the joints
with the Spanners,
remembering to twist
the pipes into position.
3) Attach fitting C to
mains gas supply us-
ing rigid copper pipe
or flexible steel pipe.
IEGB
For some models a conic link is furnished to outfit for the installation in the countries whe-
re this type of link is obligatory; in the following figures it is pointed out how to recognize
the different types of links. In every case the cylindrical part of the link has to be connec-
ted to the hob.
To prevent any potential damage to the hob please carry out the installation following
this sequence:
GB IE GBIE
Working
burner
little
large
medium
maxi
double ring
G20
G25
ø gas jet
1/100 mm
G30
G31
ø gas jet
1/100 mm
GZ 350
ø gas jet
1/100 mm
G20 20mbar G30 28-30mbar
G31 37mbar GZ350 13mbar
Qn
kW
Qmin
W
l/h
G20
l/h
GZ350
g/h
G30
g/h
G31
G20 25mbar
G30 36mbar
G25 25mbar
G31 30mbar
Qn
kW
Qmin
W
l/h
G20
g/h
G30
Qn
kW
Qmin
W
l/h
G25
g/h
G31
76
101
118
144
141
50
66
80
94
96
104
132
160
190
191
1
1,75
2,5
3,5
3,5
230
360
530
700
1750
95
167
238
333
333
132
232
331
463
463
73
127
182
254
254
71
125
179
250
250
1,2
2
2,8
4
4
260
410
620
830
1900
114
190
267
381
381
87
145
204
291
291
0,9
1,6
2,25
3,2
3,2
230
360
530
700
1750
100
177
255
354
354
64
114
161
229
229
Table of gas consumption 1 W 0,860 Kcal/h
When you have carried out the new gas regulation, replace the old gas rating pla-
te on your appliance with one (supplied with hob) suitable for the type of gas for
which it has been regulated.
USE OF HOB - USER INSTRUCTIONS
This appliance must only be used for the purpose for which it is intended, domestic
cooking, and any other use will be considered improper and could therefore be danger-
ous. The Manufacturer will not be responsible for any damage or loss resulting from
improper use.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Fig. 6
INJECTOR
CYLINDRICAL
CONICAL
Fig. 5