OWNER’S MANUAL ELECTRIC FIRE DISPLAY MODEL# HT973790 i i WARNING Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury. CAUTION Keep this owner’s manual for future reference. If you sell or give this product away, make sure this manual accompanies this product.
IMPORTANT SAFETY INSTRUCTIONS! i WARNING • Read all instructions before using this heater! • This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (36") from the front of the heater, and keep them away from the sides and rear. • Extreme caution is necessary when any heater is used.
i WARNING • For residential use only! NOT for commercial use! Any commercial or public use of this heater voids all warranties, and could cause injury. • This product is not intended to be a primary heat source. It is for supplemental heat only. • INDOOR use only! NEVER use this heater outdoors! Doing so may result in electric shock! • Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! • NEVER modify this heater. Doing so could result in personal injury or property damage.
PREPARATION i i This product includes GLASS ! ALWAYS use extreme caution when handling glass. Failure to do so could result in personal injury or property damage. · Remove all parts and hardware from the carton and place them on a clean, soft, and dry surface. Make sure all parts are dry, and the power cord and plug are not damaged. See IMPORTANT SAFETY INFORMATION on pages 2 and 3. · Compare the contents with the parts list to make sure nothing is missing. · Dispose of all packaging materials properly.
INSTALLATION AND ASSEMBLY i ALWAYS make sure the unit is unplugged before beginning assembly! NEVER move or clean the heater while it is plugged in. STEP 1: Find a safe location. Minimum clearance on each side: 20". Minimum clearance below: 20". (Wall mount only). Minimum clearance above: 39.5". Minimum clearance from the front: 36". Choose a location near an outlet so an extension cord is not required. DO NOT position the unit directly below a power outlet. NOTICE i 1 Minimum 39.
i AVOID INJURY and DAMAGE! Wood Screws(B) should be screwed directly into wall studs when possible. STEP 4: Align the holes in the Wall Bracket(E) with the pilot holes and Drywall Anchors(C). Thread three Wood Screws(B) and Metal Washers (J) through the holes in the wall bracket and directly into the wall studs and Drywall Anchors(C). Make sure the Wall Bracket(E) is level. Tighten all screws securely with a screwdriver.
CONTROL PANEL FUNCTIONS NOTICE When the heat function is used for the first time, a slight odor may be present. This is normal and should not occur again unless the heater is not used for an extended period of time. CONTROLS ON FUNCTION Power Press once. Flame effect turns on High and indicator light turns on. Press again. Power and all functions turn off. Flame +/- Press Flame (+/-) Button to desired flame brightness. 3 options. ONLY works when flame button is ON.
REMOTE CONTROL FUNCTIONS NOTICE MAIN POWER ON THE FIREPLACE CONTROL PANEL MUST BE IN THE ON POSITION TO USE REMOTE CONTROL. REMOTE CONTROL BUTTONS FUNCTION Press once to turn Power ON. Press again to turn Power OFF. Press Heater Button once, 750W (LOW HEAT) heater turns on and the fan starts to blow warm air. Press Heater Button again turns on 1,500W (HIGH HEAT) heater turns on and blows hot air. Press Heater Button again and the heater turns OFF.
REMOTE CONTROL BATTERY INFORMATION • This remote control uses one CR2025 battery (included). • Instructions for battery installation are on the Remote Control Battery compartment. PULL RELEASE RELEASE CR2025 OPEN PUSH NEVER dispose of batteries in fire. Failure to observe this precaution may result in an explosion. Dispose of batteries at your local hazardous material processing center.
WARRANTY RELATED ISSUES 1. 2. Distributed by XBrand. For details, please see our website www.XBrand-inc.com PLEASE LET US HELP YOU BEFORE RETURNING TO STORE. For any questions please email us at info@XBrand-Inc.com, or visit us at www.XBrand-Inc.com. WE APPRECIATE YOUR FEEDBACK ONLINE. PLEASE HELP US REVIEW THIS PRODUCT AT YOUR PLACE OF PURCHASE.
