Use Instructions
Table Of Contents
- 1. Overview
- 2. References
- 3. Terms and Definitions
- 4. Intended Use
- 5. Contraindications, Warnings, and Precautions
- 6. Packaging Content
- 7. Device Description
- 8. Directions for Use
- 9. Data Security and Patient Privacy
- 10. Component Maintenance
- 11. Service Life
- 12. Servicing
- 13. Disposal
- 14. Troubleshooting
- 15. Component Specifications
- 16. Electrical Safety and Standard
- 17. Warranty
- 18. Patents and Trademarks
- 19. Symbols Glossary
CanarE System
Page | 16 Instructions for Use
Rev. 4
8. Directions for Use
The following information describes the use of the CanarE System in sequential order. This
information is provided from an HCP’s perspective. It is intended to provide directions for HCPs
(including surgeons, surgeon’s staff, physicians, and nurses) in using the CanarE System. It is
also intended to inform HCPs about their patient’s role in the use of the system to support
patients’ understanding of their health care needs.
8.1. Getting Started: CanarE
Remove all components from their packaging. See Figure 4.
NOTE: Straps are provided separately.
Make sure that there are no damaged components. If damage is observed do not
use.
Connect the CanarE Charger to power with the supplied power cord and plug
adapter. A USB power supply may also be used without the plug adapter.
NOTE: The Clinic Cart contains a power source for the CanarE Charger.
Place the CanarE flat surface down (logo face up) into the CanarE Charger holder as
shown in
Figure 6 and Figure 7. The CanarE contains an LED that will indicate its
charge status while charging, as defined in Table 4.
NOTE: See troubleshooting steps in Section 14 if the CanarE LED is a constant
yellow.
When ready to use the CanarE, remove it from the Charger. The CanarE
automatically powers on.
Figure 6: CanarE Charger
Figure 7: CanarE Charger with CanarE
Charging Indicator