Specifications

ManualsBrandsCampbell Hausfeld ManualsAir CompressorFP2200 Series

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the

product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could

result in personal injury and/or property damage! Retain instructions for future reference.

CAMPBELL Oilless Air

..H,,.A.oUS.FELD, Compressors

Description

Oilless compressors are designed for

do-it-yourselfers with a variety of home

and automotive jobs. These

compressors power spray guns, impact

wrenches and other tools. These units

operate without oil.

Safety Guidelines

This manual contains information that is

very important to know and understand.

This information is provided for SAFETY

and to PREVENT EQUIPMENT PROBLEMS.

To help recognize this information,

observe the following symbols.

Danger indicates

an imminently

hazardous situation which, if not

avoided, WILL result in death or serious

injury.

IAWARNINGI Warning indicates

a potentially

hazardous situation which, if not

avoided, COULD result in death or

serious injury.

I_CAUTIONI Caution indicates a

potentially

hazardous situation which, if not

avoided, MAY result in minor or

moderate injury.

I NOTICE I Noticeindicates

important

information, that if not followed, MAY

cause damage to equipment.

Unpacking

After unpacking the unit, inspect

carefully for any damage that may have

occurred during transit. Make sure to

tighten fittings, bolts, etc., before

putting unit into service. In case of

questions, damaged or missing parts,

please call 1-800-543-6400 for customer

DO NOT RETURN THE

PRODUCT TO THE

RETAILER]

Record the Model No., Serial No. and

date of purchase located on the

compressor serial number tag.

Model No

Serial No.

Date of purchase

Retain these numbers for future

reference.

assistance or call the nearest Campbell

Hausfeld Authorized Service Center.

A listing of service center locations is

enclosed. Have the serial number,

model number, and parts list (with

missing parts circled) before calling.

I_WARNINGI Do not operate

unit if damaged

during shipping, handling or use.

Damage may result in bursting and

cause injury or property damage.

General Safety

Information

Since the air compressor and other

components (material pump, spray

guns, filters, lubricators, hoses, etc.)

used, make up a high pressure

pumping system, the following safety

Breathable Air Warning

This compressor/pump is not

equipped and should not be used

"as is" to supply breathing quality

air. For any application of air for

human consumption, the air

compressor/pump will need to be

fitted with suitable in-line safety

and alarm equipment. This

additional equipment is necessary

to properly filter and purify the air

to meet minimal specifications for

Grade D breathing as described in

Compressed Gas Association

Commodity Specification G 7.1 -

1966, OSHA 29 CFR 1910. 134,

and/or Canadian Standards

Associations (CSA).

DISCLAIMER OF WARRANTIES

In the event the compressor is used

for the purpose of breathing air

application and proper in-line

safety and alarm equipment is not

simultaneously used, existing

warranties shall be voided, and

Campbell Hausfeld disclaims any

liability whatsoever for any loss,

personal injury or damage.

_recautions must be observed at all

times:

I. Read all manuals

included with this

product carefully. Be

thoroughly familiar

with the controls and

the proper use of the equipment.

2. Follow all local electrical and safety

codes as well as in the US, National

Electrical Codes (NEO and Occupational

Safety and Health Act (OSHA).

I REMINDER: Keep dated proof of purchase for purposes] Attach it to this manual or file it for safekeeping.

your warranty

visit www.chpower.com

Summary of content (24 pages)

PAGE 1
Please read product result and save described. these instructions. Protect in personal injury yourself and/or Read and carefully others property damage! by before attempting observing Retain all safety to for CAMPBELL ..H,,.A.oUS. FELD, install, Failure future to DO NOT RETURN PRODUCT TO maintain Breathable This information and "as is" to supply air.
PAGE 2
Oilless Compressors General Safety Information (Continued) 3. Only persons well acquainted with these rules of safe operation should be allowed to use the compressor. 4. Keep visitors away and NEVER allow children in the work area. 5. Wear safety glasses and use hearing protection when operating the pump or unit. 6. Do not stand on or use the pump or unit as a handhold. 7.
PAGE 3
FP2200 Series Installation (Cont.) a. No other electrical appliances or lights are connected to the same branch Groo:d_ng _] compressor in a dean, well ventilated area circuit. where the surrounding air temperature will not be more than 100°F. A minimum clearance Grounded Outlet of 18 inches between the compressor required air flow. because objects could [_CAUTION] b. Voltage Figure 3 - Grounding 3.
PAGE 4
Oilless Compressors Operation Handle 2. Attach chuck or other end of hose. (Com.) - Designed tool to open occasionally to move the compressor. chuck and other inflation Pressure continues Position fittings. cannot be activated Tank Drain Petcock - This valve is located on the bottom of the tank. Use this valve Tool to drain moisture from the tank daily to reduce the risk of corrosion. of by the ring, the reaches 40-50 PSI.) O_ P.......
PAGE 5
FP2200 Series Maintenance The compressor often by opening tank. should be checked for any visibJe problems 3. Turn power OFF and clean dust and and the dirt from lines. following maintenance procedures should be performed each time the compressor drain cock underneath pump cover, tank and air IMPORTANT: is used. 1. Pull ring on safety valve and allow to snap back to normal it position. far from Unit should spraying allow to prevent clogging of moisture.
PAGE 6
Oilless Compressors Troubleshooting Chart Compressor will not run 1. NO electrical 2. Breaker 3. Pressure 4. Check 1. Plugged in? Check fuse/breaker power 2. Reset, determine open switch valve bad or motor overload cause of problem 3. Replace defective 4. Remove and replace check valve DO not disassemble check valve with air in tank; bleed tank Motor hums but cannot run or runs slowly 1. Poor contacts, line voltage 2. Shorted 3. Defective or open motor incorrect winding 1.
PAGE 7
FP2200 Series Troubleshooting Excessive moisture discharge Chart in air Compressor (Continued) 1. Excessive water in tank 1. Drain tank 2. High humidity runs 1. Defective continuously 2. Move to area of less humidity; pressure switch use air line filter 1. Replace switch 2. Excessive air usage 2. Decrease air usage; compressor not large enough for air requirement Excessive starting stopping and (auto start) 1. Excessive condensation 2.
PAGE 8
Oilless Compressors Limited FP2200 Series Warranty 1. DURATION: From the date of purchase by the original purchaser as follows: Standard Duty - One Year, Serious Duty - Two Years, Extreme Duty - Three Years. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld I Scott Fetzer Company, I00 Production Drive, Harrison, Ohio, 45030, Telephone: (800) 543-6400 3. WHO RECEIVESTHIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Campbell Hausfeld compressor. 4.
PAGE 9
S'il vous ddcrit. plait Se lire et prot_ger Conserver ces conserver ainsi que instructions ces les instructions. autres comme en Lire observant attentivement routes avant les de instructions T TO LAST NE PAS Description Les compresseu_ installer, sdcurit_, utiliser sinon, il y a ou risque RENVOYER PRODUIT sans hufle sont con_us Avertissement Directives De Sdcuritd Ce manuel contient de I'information tr_s D'EQUIPEMENT.
PAGE 10
Compresseurs Sans Huile Garder la soupape de s_ret_ libre de peinture et d'autres accumulations. G_n_ralit_s Sur La S_curit_ MONTAGE 3. Seules les personnes bien familiaris_es avec ces r_gles d'utilisation doivent _tre autoris_es _ se servir du compresseur. 4. Assemblaqe (Suite) Garder les visiteurs _ I'_cart de/et NE JAMAIS permettre les enfants darts I'endroit de travail.
PAGE 11
S6rie FP2200 a _t_ install_e et mise _ la terre Installation correctement I_ATTENTIONI en respectant tous les codes et r_glements ENDROIT Iocaux. Une fois mont_, le r_servoir dolt _tre nivel_ ou inclin_ un peu vers le robinet de vidange afin de permettre le vidange REMARQUE: correct. Broche II est tr_s important d'installer _Figure 3 - M6thode ¥:T17_'! _epo_ situer la 2.
PAGE 12
Compresseurs Sans Huile Fonctionnement (Suite) une fois qu'il atteigne la pression minimum r_gl_e d'avance. Darts la position OFF, le compresseur fonctionnera r_duire pas. Cet interrupteur de la prise de courant ou pendant d'outils pneumatiques. R_Jula_eur le changement le risque de corrosion. kPa, et ensuite purger l'humidit_ du r_servoir afin d'_viter la corrosion. Purger l'humidit_ duldes r_servoir(s) en ouvrant le robinet r_servoir.
PAGE 13
S6rie FP2200 Fonctionnement MANOMETRE (Suite) DE SORTIE (OUTIL) Inspecter le compresseur souvant et suivre les proc_d_s d'entretien pendant chaque utilisation 1. Ce manom_tre indique la pression d'air de sortie. La pression d'air est mesur_e en kPa. le tuyau de la sortie. MANOMETRE DU RI_SERVOIR Le manom_tre indique la sQret_ et la laisser revenir _ sa position normale. [AAVERTIS SEMENT 1 s'.
PAGE 14
Compresseurs Guide Sans Huile de D6pannage Le compresseur ne fonctionne pas 1. Manque de puissance 61ectfique 2. Disjoncteur 1. ModUle branch6? V6rifier le fusible/dis]oncteur surcharge du moteur. 2. Rajuster et trouver la source du probl_me 3. Remplacer 4. Enlever et remplacer le dapet d6clench6 3. Manostat en panne 4.
PAGE 15
S6rie FP2200 Guide de D6pannage (Suite) Humidit_ excessive dans ]'air de d_bit 1. Eau excessive dans le r_servoir 2. Humidit_ _lev_e 1. Purger le r_servoir 2. D_placer _ un endroit en canalisation d'air Le compresseur fonctionne 1. Manostat 2. Utilisation 1. Remplacer le manostat 2. R_duire I'utilisation d'air; le compresseur assez large pour la demande d'air d_fectueux d'air excessive continueHement D_marrage et coupage excessif (d_marrage automatique) 1.
PAGE 16
Compresseurs Garantie A partir Service (Serious d'acbat Duty) ACCORDEE par - Deux i'acbeteur PRODUITS Hausfeld/Scott DE CETFE GARANTEE (ACHET£UR): COUVERTS Les garanties PAR CETFE GARANTI£: imp[idtes, DE LA DATE D'ACHAT commerciale ou pour quatre cy[indres commerciaux TOUT C y compris ENmALE d'un Ja dur_e _tages pr_c_dentes DOMMAGE, Que[ques peuvent doric DU PRODUIT ou indirects. Toute panne donn_es r_suitant dans Service avant E. Articles ou services F.
PAGE 17
Sirvase este leer y manual. daAos a su guardar estas Prot_jase Ud. propiedad. instrucciones.Lea y a los Guarde este demos con cuidado observando manual como todas antes las de tratar reglas de de T TO instalar, El no manejar seguir o darle las servicio instrucciones al producto podria descrito resultar en en heridas ylo Compresores Sin Aceite CAMPBELL HAUSFELD, BUlL armar, seguridad. referencia.
PAGE 18
Compresores Sin Aceite Informaciones Generales de Seguridad (Continuacion) su pa_s, por ejemplo OSHA en EUA. 3. Este compresor s61odebe ser usado seguridad y de manejo. Mantengaalosvisitantesalejadosy NUNCA permita la presenda de nihos en el _rea de trabajo. 5. Siempreuseanteojosdeseguridady prot6jase los oidos para operar el cabezal o el compresor. 6.
PAGE 19
Serie FP2200 enchufe.Esteproducto sedebe cone(tara tierra. En casK) de que ocurra un cortocircuito, _to evitaria elriesgo de choque el_,ctrico alofrecerle un cablede desvioa lacorrienteel_ctrica. Este producto tiene un cord6n con un alambre y terminal de conexi6n a tierra. Debe conectarlo a un Ensamblaje ( Continuacion ) Introduzca el pemo a trav_s del cubo de la rueda. La cabeza hex del pemo debe estar en el lado opuesto a la pieza sobresaliente del centro del cubo.
PAGE 20
Compresores Sin Aceite Funcionamiento 0,69 bar, despu_ drene la humedad del tanque diariamente para evitar que se oxide. Para drenar los tanques abra la llave ubicada debajo del tanque. (Continuacion) Compartimiento para almacenar ENGP.UI_SE herramientas - Los acopladores r_pidos de 6,4mm (114") pueden utilizarse con mandriles accesorios para inflar. de aire y otros Este es un aparato sin aceite y no requiere engrases para su funcionamiento.
PAGE 21
Serie FP2200 Funcionamiento Este compresor se debe chequear con frecuenda para ver s[tiene alg_n tipo de ( Continuacion problemas y le debe dar el siguiente mantenimiento antes de cada uso. ) 2. Cerd6rese de que el man6metro est6 en CERO antes de cambiar de herramientas neum_ticas o desconectar la manguera. MANOMETRO DEL TANQUE Mide la presi6n del tanque para verificar que el sistema est_ fundonando adecuadamente. Este compresor no requiere lubricaci6n. ALMACENAMIENTO 1.
PAGE 22
Compresores Sin Aceite Guia de Diagn6stico El compressor fundona no de Averias 1. No hay energ_a el_ctrica 1. i Est_ conectado? 2. Cortadrcuito desconectado 3. Presostato dai_ado protector de sobrecarga del motor 2. Con_ctelo, determine la causa del problema 3. Reempl_celo 4. Desconecte y reemplace la v_lvuJa de chequeo 4. La v_lvula de chequeo est_ da_ada Chequ_e l__l chequeo El motor hace ruido 1. Voltaje ba]o 2. Defecto de la bobina del motor pero no fundona o fundona lentamente 3.
PAGE 23
Serie FP2200 Guia de Diagn6stico de Averias (Continuaci6n) Exceseso de humedad en el aire expulsado 1. Exceso de agua en el tanque 2. Humedad alta 1. Drene el tanque 2, Mueva el compresor a una _rea menos hQmeda; use un filtro de aire incorporado a la linea El compresor fundona continuamente 1. El presostato est_ da_ado 2. Consumo excesivo de aire 1. Reemplace el presostato 2.
PAGE 24
Compresores Garantia 1. Limitada DURACION: Duty) A partir - Un a_o, de la fecha Productos de compra Resistentes 2. QUIEN OTORGA ESTA GARANTIA Tel_fono: (800) 543-6400 3, QUIEN 4.