GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the bench. 2, To avoid damage, assemble the bench on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the bench is used. 4. This bench is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. TOOLS REQUIRED 1. 8" Philips screwdriver (Not provided). = For tightening all bolts. 2.
STEP 1 STEP 2 Attach back ( B ) into corresponding of right leg Secure with 1 1/4" bolt ( D ) using fillips screwdriver, not provided. STEP 3 Turn the chair upright, side up. Make sure all parts are connected and tighten all bolts completely using screwdriver. Tap in wooden caps cover bolt heads using rubber mallet. Install the cushions as shown. THE BENCH NOW READY FOR USE.
MAINTENANCE ‘Wood is a living material that continues to respond to climate condition even after being made into a piece of furniture. After assembly rub the furniture with soft rag to remove any residual dust. Wood is a natural material whose appearance will change when left outdoors. This product has been treated prior to leaving the factory. To clean, use mild soap and warm water.
1 year Limited Warranty The furniture is warranted to be free from defects in material and workmanship of the original product when purchased from one of our authorized dealers. If a product fails and is under the terms of our limited warranty, the item will be replaced, usually for a small fee. In the case of discontinued models, an item of similar quality and style will be offered to the customer. ® | year limited frame warranty Frames are warranted to be free from defects in material and workmanship.
