User's Manual
Table Of Contents
- Accuracy
- Copyrights
- Restrictions
- License Agreements
- High Risk Materials
- Contents
- firewall
- glib2
- About This User Guide
- Product description
- System hardware
- Site planning
- Connectorized Module
- Connectorized Module description
- Connectorized part numbers
- Connectorized module mounting bracket
- Connectorized Module interfaces
- Connectorized Module LEDs
- Connectorized Module specifications
- Connectorized Module heater
- Connectorized Module and external antenna location
- Connectorized Module wind loading
- Connectorized Module software packages
- Connectorized module antennas and antenna cabling
- Integrated Module
- Un-synced Connectorized Radio
- Un-synced Connectorized Radio description
- Un-synced Connectorized Radio part numbers
- Un-synced Connectorized Radio mounting bracket
- Un-synced Connectorized Radio Interfaces
- Un-synced Connectorized Radio LEDs
- Un-synced Connectorized Radio specifications
- Un-synced Connectorized Radio heater
- Un-synced Connectorized Radio and external antenna location
- Un-synced connectorized Radio wind loading
- Un-synced Connectorized Radio software packages
- Un-synced connectorized radio antennas and antenna cabling
- Antenna requirements
- FCC and IC approved antennas
- Power supply description
- Power supply part numbers
- Power supply interfaces
- Power supply specifications
- Power supply location
- Ethernet cabling
- Surge Suppression unit
- System planning
- Configuration
- Preparing for configuration
- Connecting to the unit
- Using the web interface
- Configuring connectorized radios using the Quick Start menu
- Configuring SM units using the Quick Start menu
- Using the AP menu options
- Using the SM menu options
- Radius Server
- The GPS sync source is the same on all APs or is a combination of “onboard GPS” and CMM4
- The GPS sync source is a mixture of all types (CMM3, CMM4 & “onboard GPS”)
- Operation and Troubleshooting
- Legal and reference information
- Cambium Networks end user license agreement
- Acceptance of this agreement
- Definitions
- Grant of license
- Conditions of use
- Title and restrictions
- Confidentiality
- Right to use Cambium’s name
- Transfer
- Updates
- Maintenance
- Disclaimer
- Limitation of liability
- U.S. government
- Term of license
- Governing law
- Assignment
- Survival of provisions
- Entire agreement
- Third party software
- Hardware warranty
- Limit of liability
- System threshold, output power and link loss
- Compliance with safety standards
- Compliance with radio regulations
- Notifications
- Data throughput tables
- Radio Specifications
- Glossary
- Cambium Networks end user license agreement
- Aquila
- Linux Kernel
- gpio_keys
- OpenWrt
- uboot
- jQuery
- Data-Driven Document
- AjaxFileUpload
- jquery.caret
- jquery.cookie
- json2.js
- jquery.noty
- SlickGrid
- jquery.event.drag
- IE9.js
- busybox
- dnsmasq
- dropbear
- ebtables
- eventlog
- hostapd
- hotplug
- iperf
- iproute2
- iptables
- iputils
- Button-hotplug
- libdbi
- libiconv
- libiwinfo
- Libnl-tiny
- libpcap
- libtool
- lua
- LuCi
- mtd
- ncurses
- Net-snmp
- openssh
- openssl
- opkg
- pcre
- procps
- px5g
- swconfig
- Syslog-ng
- tcp_wrappers
- tcpdump
- uClibc++
- Uboot-envtools
- PPPd and PPPoE
- uci
- udevtigger
- uhttpd
- wget v 1.10.2
- Wireless-tools
- zlib
- lighttpd
- klish
- libroxml
- conntrack-tools
- libmnl
- libnetfilter_conntrack
- libnfnetlink
- lua-cjson
CAMBIUM NETWORKS
Identity-based user accounts
When identity-based user accounts are configured, a security officer can define from one to four user accounts,
each of which may have one of the four possible roles:
• ADMINISTRATOR (default username/password “admin”), who has full read and write permission.
• INSTALLER (default username/password “installer”), who has permission to read and write parameters
applicable to unit installation and monitoring.
• HOME (default username/password “home”), who has permission only to access pertinent information for
support purposes
• READONLY (default username/password “readonly”), who has permission to only view the Monitor page.
SNMP
The management agent supports fault and performance management by means of an SNMP interface. The
management agent is compatible with SNMP v2c using one Management Information Base (MIB) file which is
available for download from the Cambium Networks Support website
(https://support.cambiumnetworks.com/files/epmp
).
NETWORK TIME PROTOCOL (NTP)
The clock supplies accurate date and time information to the system. It can be set to run with or without a
connection to a network time server (NTP). It can be configured to display local time by setting the time zone and
daylight saving in the Time web page.
If an NTP server connection is available, the clock can be set to synchronize with the server time at regular
intervals.
ePMP devices may receive NTP data from a CMM3 or CMM4 module or an NTP server configured in the
system’s management network.
The Time Zone option is configurable on the AP’s Configure => System page and may be used to offset the
received NTP time to match the operator’s local time zone.
CAMBIUM NETWORK SERVICES SERVER
The Cambium Network Services Server (CNSS) may be used to monitor, configure, and upgrade Cambium
network equipment.
For Cambium Network Services Server download, see https://support.cambiumnetworks.com/files/cnss.
SOFTWARE UPGRADE
Software upgrades may be issued via the radio web interface (Tools => Software Upgrade) or via CNSS
(Cambium Networks Services Server).
For Software upgrades, see
https://support.cambiumnetworks.com/files/epmp.
FURTHER READING ON SYSTEM MANAGEMENT
For more information on system management, see:
• AP System page on page 101
• SM System page on page 158
• Operation and Troubleshooting on page 218
26