Specification

Model 5070
Calculator Features:
Wire Sizes•
Integrated Voltage Drop•
Conduit Sizing•
Motor Full-Load AMPs•
Fuse and Breaker Sizes•
Parallel and Derated •
Wire Sizing
Service and Equipment •
Grounding Conductor Sizes
4840 Hytech Drive
Carson City, NV 89706
1-800-854-8075
Visit our website at:
www.calculated.com
Wire Sizes, Integrated Voltage Drop,
Conduit Sizing
Motor Full-Load AMPs,
Fuse and Breaker Sizes
NEC
®
Tables Show for
Wire Size Calculations
Service and Equipment
Grounding Conductor Sizes
The ElectriCalc Pro is the world’s most complete Code-based electrical
calculator. Solve electrical calculations in seconds; answers conform to
current NEC
®
. It’s a complete electrical reference tool that will save time
and money. Update to future code revisions with an easy-to-install kit.
Dedicated Keys and Functions Make It Easy To Use!
National Electrical Code® and NEC® are registered trademarks of the National Fire Protection Association, Inc., Quincy, MA 02269.
5070-SPEC-E-4C-03_12
Electrical Code Calculator Compliant with
2011, 2008, 2005, 2002, 1999 and 1996 NEC
®
Electrical Contractors • Designers • Engineers • Electricians • Maintenance
Inspectors • Planners • Builders • Lighting Specialists
Protective hard
case with
soft-grip and
tough 360°
flip-top cover
NEC
®
COMPLIANT
Solve Electrical
Calculations in
Seconds!
ARMADILLO GEAR™
INCLUDE
D
Wire Types — Calculates
wires in Raceways and
cross-sectional wire areas.
Conduit Size — Find
conduit sizes based on total
area of entered wire types
and sizes.
HP Motor — Enters or
calculates motor horsepower.
Dual Element Fuse —
Calculates minimum amp
rating for Dual Element
Fuse, full-load current
percent multiplier.
HP Theoretical —
Enters or calculates
theoretical horsepower.
Set — Accesses
secondary functions.
Includes a rugged, shock,
dust and moisture resistant
Armadillo Gear case.
Inverse Time —
Calculates the minimum
amp rating for an Inverse
Time Breaker.
Voltage Drop — Enters
or calculates voltage drop
and actual percentage.
Overload — Displays the
overload amperage based
on the full-load current on
motor nameplate.
Length — Enters or
calculates the length of a run
for voltage drop calculation.
Wire Sizes — Enters or
calculates wire sizes based
on ampacity and voltage
drop for Ground, Derated,
Parallel and Motor, etc.
Preferences — Used to
set default settings or modes,
including NEC Code Year.
Electrical Units — Enters
or solves electrical values.