User's Manual

SPECIFICATIONS
001-9193-001 Version 2 Page 50 of 52 Sentry 4G
TM
User
Manual
6. SPECIFICATIONS
Product specifications are subject to change without notice.
GENERAL SPECIFICATIONS
Interface Connectors: Two 10/100 BaseT auto-MDIX, RJ-45
USB A Female Client port
1
3-wire RS-232 in a USB mini B female form factor
Power Connector: 4-pin Weidmuller 1615550000
LED Indicators: PWR, STAT, GPS, 4G, WiFi,3G, ETH0, ETH1
Antenna Interface: Two 4G Antennas: 50-Ohm TNC Female
GPS Antenna: 50-Ohm, 3.3V SMA Female
Two WiFi Antennas: 50-Ohm RP-SMA Plug
Two 3G Antennas: 50-Ohm SMA Female.
Size: 7 (L) x 7 (W) x 2.2(H) inches (17.8 x 17.8 x 5.6 cm)
Weight: 4 lbs (1.81 kg)
Power Input: 10-30 VDC
Current Drain:
(Average at 13.8 VDC)
TX Power Range: WWAN: BTS controlled, up to 34 dBM
WiFi: 26 dBm (802.11b) & 21-26 dBm (802.11g)
Frequency Range: WWAN: 2.496 GHz to 2.69 GHz
Channels: Static list
Modulation: S-OFDMA TDD QPSK, 16QAM, 64QAM
Diversity: 2x2 MIMO Matrix A
Operating Temperature: -30°C to +60°C (-22 to +140 °F)
Protocols: Ethernet / IPV4 suite, DHCP client/server, NAT
Management: HTTP embedded WEB server
1
Reserved for future use
Current Drain
TX
With WiFi module
3 A
Without WiFi module
2.2 A