Specifications

Performance Tuning, and Monitoring 175
be completed), the number of calls attempted, and the number of calls
completed. The following list describes the information provided by this
command.
Note: The messages are relative to the HSP. For example, the message, SETUP
RECEIVED FROM VFAX
means that the HSP received a setup message from a voice
port; the message,
SETUP SENT TO NETWORK means that the HSP sent a setup
message into the frame relay network.
Message Description
SETUP RECEIVED FROM VFAX The number of setup messages received from this voice port. This indicates that
the call originated at this voice port and that it is an outbound call.
SETUP SENT TO NETWORK The number of setup messages sent to the network. This indicates that the call
successfully matched an outbound rule. If outbound address translation fails,
the Setup Received from Vfax counter increments, but this counter does not.
SETUP RECEIVED FROM NET The number of setup messages received from the network. This indicates an
inbound call attempt.
SETUP SENT TO VFAX The number of setup messages sent to the Vfax.
CONNECT RECEIVED FROM VFAX The number of connect messages received from the voice port. This indicates
that the destination voice port was set up successfully.
CONNECT SENT TO NET The number of connect messages sent to the network.
CONNECT RECEIVED FROM NET The number of connect messages received from the network. This indicates
that this voice port received a connect message from the remote Vfax.
CONNECT SENT TO VFAX
The number of connect messages sent to the network. This indicates that an
end-to-end voice call was sucessfully established.
ANSWER RECEIVED FROM VFAX The number of answer messages received from the Vfax. This indicates that
the user picked up the telephone handset.
ANSWER SENT TO NET
The number of answer messages sent to the network. This indicates the
answer message is forwarded back to the call originator.
ANSWER RECEIVED FROM NET The number of answer messages received from the network.
ANSWER SENT TO VFAX The number of answer messages sent to this voice port.
RELEASE RECEIVED FROM VFAX
The number of release messages received from the voice port. This indicates
that this voice port should initiate the disconnect process.
RELEASE SENT TO NET
The number of release messages sent to the network.
RELEASE RECEIVED FROM NET The number of release messages received from the network.
RELEASE SENT TO VFAX The number of release messages sent to the Vfax.
CAUSE OF LAST RELEASE
RECEIVED FROM VFAX
Displays the cause of the last release message that was received from the
Vfax.
CAUSE OF LAST RELEASE SENT
TO VFAX
Displays the cause of the last release message that was sent to the Vfax.
CAUSE OF LAST RELEASE
RECEIVED FROM NET
Displays the cause of the last release message that was received from the
network.