Installation Guide

Manufactured by Benjamin Moore & Co. 101 Paragon Drive, Montvale, NJ 07645 Tel: [phone] Fax: [phone] www.Insl-x.com M72 CC-55XX US 030118
CABINET COAT
TRIM & CABINET ENAMEL
SATIN FINISH CC-55XX
Features
General Description
 Urethane acrylic cabinet
and trim finish
 Resists chipping, scuffing,
food stains, grease & water
 Super adhesion
 Waterborne formula
provides an ultra smooth
“factory-like” finish
 Durable satin finish
Cabinet Coat is the ultimate finish for refurbishing dingy
kitchen and bathroom cabinets, shelving, furniture, trim &
crown molding and other interior applications that require an
ultra smooth, factory like finish with long lasting beauty. Its
superior adhesion allows painting difficult surfaces, even
polyurethane and varnish, without using a primer. Cabinet
Coat offers excellent flow and leveling, superior stain
resistance and an extremely durable satin finish that will look
like new for years.
Recommended For
Limitations
Cabinets, Metal, New & Previously Painted Wood, Furniture,
Woodwork, Doors Trim.
 Do not apply when air, product or surface temperature is
below 50 ºF (10 °C), above 90 ºF (32 °C) or within 5 ºF of
the dew point.
 Not for surfaces that will be immersed in liquids (sinks or
tubs) or the surface of stoves or ovens.
Product Information
Colors — Standard:
White (01)
Technical Data
Base 1
Vehicle Type
Urethane Reinforced Acrylic
Pigment Type
Titanium Dioxide
Volume Solids
35.2 ± 1.0%
Coverage per Gallon at
Recommended Film Thickness
350 - 450 Sq. Ft.
Recommended Film
Thickness
– Wet
3.6 - 4.6 mils
– Dry
1.3 - 1.6 mils
Depending on surface texture and porosity. Be sure to
estimate the right amount of paint for the job. This will
ensure color uniformity and minimize the disposal of excess
paint.
Dry Time @ 77 °F
(25 °C) @ 50% RH
– Tack Free
1 Hour
– To Recoat
6 Hours
– Full Cure
5 – 7 Days
High humidity and cool temperatures will result in longer
dry, recoat and service times.
Dries By
Coalescence
Viscosity
90 – 95 KU
Flash Point
200 °F or greater
(TT-P-141, Method 4293)
Gloss / Sheen
Satin (27 - 32 @ 60°)
Surface Temperature at
Application
– Min.
50 °F
– Max.
90 °F
Thin With
Refer to page 2
Clean Up Thinner
Warm Soapy Water
Weight Per Gallon
10.9 lbs.
Storage Temperature
– Min.
50 °F
– Max.
90 °F
Volatile Organic Compounds (VOC)
44.7 Grams/Liter 0.37 Lbs./Gallon
— Tint Bases:
Base 1, 2, 3 & 4
Tint with Universal colorants only
— Special Colors:
Contact your dealer.
Certifications & Qualifications:
The product supported by this data sheet contains a maximum of 50 grams
per liter VOC/VOS (0.42 lbs./gal.) excluding water & exempt solvents.
This product meets the qualifications for LEED (Leadership in Energy and
Environmental Design) projects as a Non-Flat Coating.
Technical Assistance:
Available through your local authorized independent Insl-x dealer.
For the location of the dealer nearest you, call 1-866-708-9180 or visit
www.insl-x.com
◊ Reported values are for Base 1. Contact your dealer for values of
other bases or colors.