ATTENTION If any components of this unit are broken or the unit does not operate properly, please contact Cabela’s Customer Service. Retail Store Purchases: 1-800-905-2731 (U.S. & Canada) Catalog and Internet Purchases: 1-800-237-8888 All International: 1-308-234-5555 DO NOT RETURN THE UNIT TO THE STORE WHERE IT WAS PURCHASED! Model No.
Control Panel WARNING! Before cleaning, assembling or disassembling the Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE! 12 NOTES _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ _____________________________________________________________________ 1 6 _____________________________________
WARNING! Q: The bag seal pulls apart. 1. If the seal has not fully welded the bag closed, trim off the bad seal with scissors and adjust the Seal Time Up (+) in one second increments and try the test process again. 2. The Vacuum Sealer is only intended to be used with vacuum sealing bags. For best results, Cabela’s Vacuum Bags should be used. DO NOT USE HOUSEHOLD BAGS with the Vacuum Sealer. 3. The seal of the bag may be incomplete.
WARNING! Before cleaning, assembling or disassembling the Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE! IMPORTANT SAFETY RULES WARNING! READ AND FULLY UNDERSTAND ALL INSTRUCTIONS AND WARNINGS PRIOR TO USING THIS UNIT. YOUR SAFETY IS MOST IMPORTANT! FAILURE TO COMPLY WITH PROCEDURES AND SAFEGUARDS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE. REMEMBER: YOUR PERSONAL SAFETY IS YOUR RESPONSIBILITY! 1.
WARNING! TROUBLESHOOTING Before cleaning, assembling or disassembling the Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE! Q: Nothing happens when the Power Button is pressed! 1.0 Make sure that the Power Cord is not damaged in any way. I 3.0 If the Vacuum Sealer is properly plugged in, and the Power Button still does not work, check the Fuse, located above the Power Supply Port, on the right side of the Vacuum Sealer.
WARNING! Before cleaning, assembling or disassembling the Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE! VACUUM CHAMBER SEALS There are two factory-installed Oval Vacuum Chamber Seals on the Vacuum Sealer. When the Vacuum Lid is closed and downward force applied, they form an airtight seal so the Vacuum Chamber can be evacuated. the foods are already chilled when they go into the insulated hamper.
FOOD SAFETY There are basic rules to follow when handling food. They are COOK, SEPARATE, CLEAN, and CHILL. COOK It’s crucial to cook food to a safe internal temperature to destroy bacteria that is present. The safety of hamburgers and other foods made with ground meat has been receiving a lot of attention lately, and with good reason. When meat is ground, the bacteria present on the surface is mixed throughout the ground o o o mixture.
WARNING! Before cleaning, assembling or disassembling the Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE! CONTROL PANEL . Seal Time + and - Buttons: The Seal Time Button adjusts the number of seconds that the Sealing Bar will apply heat to create the bag’s seal. The optimal time for different brands of bags can be adjusted using the Plus (+) or Minus (-) Buttons.
WARNING! STORAGE LIFESPAN GUIDELINES . IMPORTANT NOTE: Vacuum packaging is NOT a substitute for refrigeration. Vacuum packed perishable foods still require refrigeration. . NEVER thaw frozen foods at room temperature. or microwave oven. Thaw frozen foods in a refrigerator . In general, the colder the temperature at which foods are stored, the longer the shelf life. .
WARNING! Before cleaning, assembling or disassembling the Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE! BEFORE YOU START BAG SEALING Before using the Vacuum Sealer, familiarize yourself with the bag sealing functions. A vacuum bag is sealed when the Seal Bar Heating Element is activated and heats the bag to its melting point, which then permanently welds the bag layers together, sealing the bag shut.
WARNING! WARNING! Before cleaning, assembling or disassembling the Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE! Before cleaning, assembling or disassembling the Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE! MAINTENANCE KIT INSTRUCTIONS INITIAL TESTING OF THE BAG SEAL Some parts of the Vacuum Sealer may need replacing after repeated use.
WARNING! Before cleaning, assembling or disassembling the Vacuum Sealer, make sure the Vacuum Sealer is OFF and the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE! Figure C 2. Place the items to be vacuum sealed into a vacuum bag. Allow at least 2” (5 cm) at the open end of the bag in order to create enough seal space. Be sure not to cover the Vacuum Port (Figure C). 3. Close the Vacuum Lid and check that the bag opening is in the center of the Vacuum Chamber. 4. Press and release the Start Button.