Instructions
Table Of Contents
- Table of Contents
- DIC-24102
- DIC-24102
- DIC-24102
- DIC-24102
- DIC-24102
- DIC-24102
- Índice
- 1 Seguridad
- 2 Descripción de las piezas
- 3 Instalación
- 4 Funciones básicas
- 5 Pantalla de inicio y menús
- 6 Preguntas más frecuentes
- 7 Especificaciones
- 8 Medio ambiente
- 9 Declaración de conformidad
- DIC-24102
- DIC-24102
- DIC-24102
Instruction manual
7
3 Installation
3.1 FIX THE MOUNTING PLATE OF THE
INDOOR UNIT (MONITOR)
To mount the monitor, you will need the following tools:
ü A suitable screwdriver for the included screws.
ü A drill and suitable drill bit for the included screw plugs.
A. Position the provided mounting plate where desired.
B. Mark the screw positions with a pen.
C. Drill the necessary holes.
D. Insert the plugs.
E. Pull the required cables through the mounting plate.
F. Fasten the mounting plate with the screws.
3.2 ELECTRICAL INSTALLATION
3.2.1 Connecting an additional monitor
To connect an additional monitor to an existing monitor, a BLUE
terminal block is available. The additional monitor acts as a repeater
to one of the main monitors.
To connect the terminal blocks, you will need the following tool:
ü A small flat head screw driver.
A. BLUE terminal block: Loosen the terminal screws.
B. With the terminal facing you, insert the black wire on the left and
the red wire on the right.
C. Fasten the terminal screws.
D. Connect the terminal block to the existing monitor. (See sticker on
the existing monitor for position)
E. Repeat steps a-d to fasten an identical terminal block to the other
end of the cable and connecting it to the additional monitor.
3.2.2 Connecting the AC power
To connect the AC terminal blocks, you will need the following tool:
ü A small flat head screw driver.
A. ORANGE terminal block: Loosen the terminal screws.
B. With the terminal facing you: Insert the (-) wire on the left and the
(+) wire on the right.
C. Fasten the terminal screws.
D. Connect the terminal block(s) to the monitor.
3.2.3 Mount the indoor unit
ü A suitable screwdriver for the included screws.
A. Attach the indoor unit to the mounting plate.
4 Basic functions
4.1 ANSWERING A CALL
When the doorbell rings, you can:
A. Press the gate button to open the gate (optional).
B. Press the lock button to open the door (optional).
C. Press the camera button to make a video or take a picture.
D. Press the talk button to talk to your visitor.
EN