SINGLE ROW LED LIGHT BAR NHT LIGHT BARS Page 1 | Night Hawk Single Row LED Light Bars
Congratulations on your purchase of the Bushranger® Night Hawk® Single Row Light Bar. To take full advantage of this product, please read this manual carefully before using. Retain this manual for future reference for installation and warranty.
Specifications Overview General Specifications Bushranger® Night Hawk Single Row LED Light Bars have been developed from the ground up by our team of engineers to offer a compact and low-profile design which takes performance, looks and usability to a whole new level.
Key Features Light Performance High Output OSRAM LED’s • • • Genuine, high output OSRAM LED’s produce huge effective lumens outputs for each size in the range. Unrivaled 1lux distance and width performance for slimline single row light bars Tested by an Australian NATA accredited photometry lab to produce real light performance data.
Isolux Data All results shown below are obtained from real scientific testing carried out by a NATA Accredited Photometric Laboratory in Australia. NHT055VLI (5.5”) – SPOT BEAM (NO COVER FITTED) NHT055VLI (5.5”) – 1 x DIFFUSED COVER Max distance @ 1lux = 43m |Max Primary Beam Width @ 1lux = 20m Max distance @ 1lux = 267m |Max Primary Beam Width @ 1lux = 15m 10 6 2 -2 -6 -10 METRES 12.50 7.50 27 32 38 49 60 69 77 84 119 154 189 267 2.50 -2.50 NHT055VLI (5.
Isolux Data All results shown below are obtained from real scientific testing carried out by a NATA Accredited Photometric Laboratory in Australia.
Isolux Data All results shown below are obtained from real scientific testing carried out by a NATA Accredited Photometric Laboratory in Australia.
Isolux Data All results shown below are obtained from real scientific testing carried out by a NATA Accredited Photometric Laboratory in Australia. NHT435VLI (43.5”) – 11 x SPOT BEAM COVERS NHT435VLI (43.
Components Supplied Installation Instructions Important Notes • • • • 1 • 2 • ISOMETRIC VIEW N.T.S. 3 4 11 12 • We recommend the lights / wiring to be fitted by a qualified automotive electrician. A forward facing light system may be used only as an auxiliary to high beam. Check compliance and regulations with local authorities. Vehicle accessories mounted on the outside of the vehicle may need to comply with regulations governed by your local state authority. Please check before installation.
Angle Adjustment Vehicle Mounting & Adjustment The mounting feet can be moved through 200° rotation by utilising the two individual channels in the body of the light bar and the two hole positions in the mounting feet. All configurations shown below: Light bars can be mounted using the supplied mounting feet or tube clamps are available (sold separately) for bar mounting applications.
Our unique, relay free Variable Light Intensity Series wiring system greatly simplifies the installation of these light bars into modern vehicles and allows the full functionality of the VLI Series lights to be achieved. Not only is this system easier to install and more reliable than traditional relay-based wiring looms, but it also allows the brightness of all lights connected to be varied, which gives the driver full control of light intensity at the turn of a dial.
KINGSLEY PRODUCTS - WARRANTY POLICY 1. Our Warranty We warrant to you that the Kingsley product is free from defects in workmanship and materials for the warranty period. 2. Fitting and use Please ensure you: a. fit the Kingsley product in accordance with the product information and all relevant vehicle safety and compliance laws b.
