Owner Manual

!
Congratulations on your purchase of a Bushman Arcticold DC-L fridge.
Please read these instructions carefully before installation and use.
Please be safe and use common sense and caution when installing,
operating and cleaning this appliance. If you are unsure about any of these
instructions, contact your local dealer before proceeding.
IMPORTANT INFORMATION
Do not lay your fridge on its back, top or sides or at any angle exceeding 30º.
If your fridge has been incorrectly handled, ensure that the fridge is placed in
a level upright position for 12 hours to allow the internal fluids to redistribute
evenly.
Never operate your fridge directly from a 240 V or AC power supply.
Do not use a modified sine wave inverter to operate your fridge.
PRIOR TO INSTALLATION
DELIVERY
At delivery, please check that the fridge is complete and is not damaged in
any way. Remove all packaging and securing tapes from the fridge. To avoid
injury and causing damage to the appliance, be extremely cautious when
using sharp or pointed tools to complete this task.
Do not connect an appliance that has been damaged, contact your local
dealer immediately.
INSTALLATION
Installation of the DC-L range of fridges must be completed by a suitably
trained professional only.
POWER SUPPLY
Your fridge must be connected to a stable and regulated 12 V or 24 V DC
power supply only. The compressor will automatically detect which voltage is
present adjust accordingly.
If you are using a generator or other power supply, the output must be a pure
sine wave. Any fluctuations in generator current may damage the
compressor.