Troubleshooting Guide

6. Remove the levelling feet from anotherside of the
Loosely secure.
8. Carefully set the door back into place.Install the
upper hinge and screws. Ensure the door is aligned
9. Put the top cover back and fix it in place with the screws.
10. With the door closed, check that the door is aligned
horizontally and vercally and that the seals are closed on
all sides before finally ghtening the boom hinge.
Re-adjust the levelling feet as needed.
20
screw
screw
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,