Instruction Manual

ManualsBrandsBush ManualsRadios and clock radiosDAB Bluetooth Wooden Radio

Using your Stereo DAB/FM Radio with Bluetooth

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the

Troubleshooting

Using your Stereo DAB/FM Radio

Let’s get started

Using your Stereo DAB/FM Radio

Let’s get started

Audio mode

The radio will automatically switch between Stereo and Mono, depending on the quality

of the signal being received but you can override this function and manually switch

between Stereo and Mono.

1. Press and hold the Menu button to enter the menu options.

2. Use the Tune/Select control to scroll to <Audio setting>. Press to Select.

There are now two different options of <Forced mono> and <Stereo allowed> and the

current setting will have an ‘*’ in the display.

3. Use the Tune/Select control to choose from the two options available and press to

Select.

Storing an FM station preset

Your radio can store up to 10 FM stations in its preset memories for instant access to your

favourite stations.

Note: When you store FM radio station presets, these do not overwrite your DAB

station presets.

1. Tune the Radio to the FM radio station that you wish to preset.

2. Press and hold the Preset button for approximately 2 seconds until Preset Store

<1:(Empty)> is displayed.

3. Use the Tune/Select control to move to the preset location that you would like to

store the radio station to (1-10).

Note: When you store a radio station to Preset location 1 or 2, this will also be saved

under the number ‘1’ and ‘2’ buttons on the front of your radio.

4. Press the Tune/Select control to Select, the display will confirm Preset X stored, where

‘X’ is the number of the preset (1-10).

Note: If there is already an existing FM station stored under a preset, it will be over

written when you store the new station.

Tune to an FM preset station

In FM mode:

Note: To quickly access the radio stations stored under Preset locations 1 or 2, you can

just press and release the ‘1’ or ‘2’ button, as appropriate, on the front of your radio.

1. Press and release the Preset button. Preset Recall <1:> is displayed together with the

name or frequency of the station stored there, or (Empty) if no previous station has

been stored.

2. Use the Tune/Select control to move to the Preset location and station that you would

like to listen to (1-10).

3. Press the Tune/Select control to Select. The radio will instantly tune to that station and

begin to play.

Note: If no FM station has been stored under the preset button, ‘Preset Empty’ will be

displayed, then the radio will revert to the previously selected radio station.

FM display information

When listening to an FM station you can change the information that will appear on the

second line of the display.

• Radiotext (RT) - This is scrolling text information supplied by the broadcaster.

Information could be the name of an artist or music title, DJ’s name, contact details

for the radio station etc.

• Program Type (PTY) - Such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’

• Station name or frequency - Such as BBC R4 or 93.30MHz

• Audio mode – Stereo or Mono

• Time and date - Supplied by the broadcaster.

1. Repeatedly press and release the Info button to cycle through the different information

options.