Replacement Part List

Item # 701SL
SlickShot
™
Slick Shot is a spray-on lubricant that
increases the life of a MAGNUM
™
or
EZ
™
Shear when used regularly to
keep the moving parts “tuned-up”
and lubricated. Special water-based,
low VOC formula that lubricates parts
without creating an oily residue. Use
on the shears’ pins (vertical shafts)
and bearing surfaces for best results.
One bottle contains enough lubricant
for 6 months of heavy use.
Ergonomic 3” x 7” Item # .................... 711
Pro Length 3” x 12” Item # ..............711P
Tapping Blocks
Solid, durable, high
quality plastic tapping
block is great for
closing gaps during
flooring installation.
Ergonomic handle
provides an excellent
grip.
Magnum Floor Driver
Designed by the installer for the installer. The
ultimate solution to hardwood installation:
a tapping block and hammer in one. Precise
weight and curved edge to drive with ideal
force, tapping hardwood or engineered wood
planks into place without damaging tongues
and edges. 5-year Bulletproof Warranty
Hone
Stone
Item # 701S
The Hone Stone is a necessary accessory for all MAGNUM
™
and
EZ
™
Shears to ensure a consistent, high-quality clean cut, and is
an excellent way to extend the life of any blade. Run the Hone
Stone along the flat side of the shear’s blade after each job, and
the shear will continue to perform at the same level as it’s first
cut. With regular maintenance, a shear blade can outlast 20 saw
blades. Requires no fluid or oil prior to or during use.
For 13” Shear, order Item # 856AG -13
For 20” Shear, order Item # 856AG-20
For 26” Shear, order Item # 856AG-26
Angle Guide Kit
Provides a fixed “stop” point for repeat cuts. Kit includes Angle
Guide and fence upgrade. Indicate size of shear when ordering.
A must-have attachment for the MAGNUM
Flooring and Siding Shears, providing a
convenient guide for consistent, precise
diagonal and straight cuts. Sets any angle
0 to 90°. Removable and adjustable
for greater versatility. Built-in ruler
for easy measurements and
accuracy.
All-Angle Fence
Models 213 - Order Item # 701AF
Model 940 - Order Item # 740AF
Stair treads are almost never square, which makes fitting flooring
on stairs with standard tools difficult. We have a solution: Create
perfect treads and risers every time with the Stair Step Scribe 2
™
!
Fast, easy to use, accurate.
Item # BT91-0048
Stair Step Scribe 2
™
This mondo pull bar delivers. Its beveled end
pries into tight spaces, while the steel block
provides a durable hammer contact point.
When you need extra strength, this tool is
the answer! Better than the competition,
and more economical!
Heavy-Duty Pull Bar
20” long
Item # 712HD
Shear Maintenance Kits
The Shear Maintenance Kit (SMK) is an essential for
all shear owners. It extends tool life and provides
“insurance” against down time from damaged
blades and maintenance issues.
The kit’s big bonus is a one-year extended warranty
on any new or active warranty.
Each quality kit contains:
• Premiumreplacementblade
• SlickShot–ForQuietEasyCuts
• HoneStone–ForaRazor’sEdge
• BearingGrease–forSmoothOperation
• BladeStopReplacement*
*For Those Shears That Use BladeStops
Choosethekitthatmatchesyourshear–
item numbers from 113-SMK to 920-SMK
Item # C K 5 0 -1110
Quickly and cleanly cuts through foam and fiber insulation
products like batt Insulation, Denim/Bonded Logic and fiberglass,
without dust and debris.
Insulation Knife Kit
Kit Includes:
• 7”(175mm)Razor-EdgedBladewithUniversalTang
• ErgonomicKnifeHandle
• DualGritCeramicSharpener
Bullet Vinyl Glider
The Bullet Vinyl Glider gives the professional an easy solution
to rip-cuts. Make straight, clean, score-and-snap cuts on luxury
vinyl planks, WPC, or luxury vinyl tile up to 9.5” wide.
Item # BT92-20 95
Bullet Vinyl Cutter
The Bullet Vinyl Cutter makes quick, accurate cuts on vinyl
plank flooring up to 9.5” (241mm) wide and 7/16” (12mm) thick.
Achieve faster and easier installation of vinyl flooring while
maintaining professional results.
Item # BT92-2195 Item # MT93-0044
PATENT PENDING
PATENT PENDING