Product Manual

• Network
o On– Added to a Z-Wave network
o Blinking– In learn mode
o Off– Not added to a Z-Wave network
• Valve Open
o On– Open
o Blinking– Opening
o Off– Closing or closed
• Valve Closed
o On– Closed
o Blinking– Closing
o Off– Opening or open
• Flow
o On- Water is flowing
o Off – No water is flowing and no hardware events active
o Blinking – Hardware event active
▪ 2 Blinks – High flow sensor failure
▪ 3 Blinks – Low flow sensor failure
▪ 4 Blinks – Actuator failure
▪ Steady Blink – Low flow calibration in progress
• Alert
o Off – No active events
o Blinking - Flow/temperature event active
▪ 2 Blinks – High flow event
▪ 3 Blinks – Medium flow event
▪ 4 Blinks – Low flow event
▪ 5 Blinks – Temperature event
Note: If all LEDs are off, the device has no power. All LEDs will flash for five seconds during a
factory reset.