Owner`s manual
.*...-...i..
"
.
To
replace the turn/park bulb:
1.
Rotate the bulb socket housing 1/4 turn
counterclockwise.
2.
Push in and turn the bulb counterclockwise to
remove it.
3.
Put in the new bulb and turn it clockwise.
4. Snap the wire connector onto the bulb assembly.
r
To
replace the side marker bulb:
1. Remove the socket by turning it counterclockwise
2:
"'Remove the bulb by pulling it straight out
of
the
3.
Insert the new bulb by pressing it straight into the
4.
Insert the socket by pressing it straight into the bulb
and pulling it straight out.
Iq."
.
. .
.
socket.
socket.
hole and turning it clockwise.
To
reinstall the lamp:
1.
Guide the latch spring
through the opening in
the metal inner panel.
6-29