User's Manual
Table Of Contents
- Chapter 1 - Product Overview
- Chapter 2 - Placing Your AirStation
- Chapter 3 - Installation
- Chapter 4 - Configuration
- Chapter 5 - Connect to a Wireless Network
- Chapter 6 - Troubleshooting
- Appendix A - Specifications
- Appendix B - Default Configuration Settings
- Appendix C - TCP/IP Settings
- Appendix D - Restoring the Default Configuration
- Appendix E - Regulatory Compliance Information
- Appendix F - Environmental Information
- Appendix G - GPL Information
- Appendix H - Warranty Information
modem
1) connect
LAN cable
2) connect
INTERNET port
AirStation wireless
router (rear side)
ÐÏ×ÅÒ
ÉÎÔÅÒÎÅÔ
ÌÁÎ
ᴮ
ᴯ
ᴰ
ᴱ
computer
modem
2) disconnect
2) disconnect
ÏÆÆ
1) turn o the computer
WCR-HP-GN User Manual 13
Chapter 3 - Installation
Manual Setup
To congure your AirStation manually, follow the procedure below.
1
Turn o your computer and modem. If the modem doesn’t have an o switch, unplug its
power connector.
2
Find the LAN cable that connects your
computer and modem. Unplug it
from the computer.
3
Plug the LAN cable from the modem into the Internet (WAN) port of your AirStation. Turn on
the modem.
Automatic Setup
The AirNavigator CD can step you through installing your AirStation. To step through the setup pro-
gram, insert the CD into your Windows 7/Vista/XP PC and follow the instructions on the screen.
If your computer uses a dierent operating system, use manual setup instead.