Instructions / Assembly

ITEM # PUT66 POP UP CANOPY TENT

CBA

Contents:

A Tent (1 piece)

B Support Rods (2 pieces)

C Carry Bag (1 piece)

How To Assemble:

1. Remove contents from carry bag.

3. Unbend the two Support

Rods (E), insert each into Top (F)

and Bottom (G) door pockets.

2 3 3

TOP

BOTTOM

MIDDLE STEM

2. Pull out Middle Stem (D)

on each side wall. Step

inside tent, push up top

ceiling panel into the

shape of a pyramid.

SUPPORT

RODS

ITEM # PUT66 POP UP CANOPY TENT

How To Disassemble:

1. Remove both Support Rods from the door

the door pockets.

2. Push all inside side walls and gather fabric

tightly.

3. Roll the tent, and slide the Support Rods

inside, and insert into the Carry Bag.

IMPORTANT

● Take tent down during high wind.

● Let tent dry before closing.

● Do not store when fabric is wet.

● Use mild detergent to clean surface.

● Do not leave tent unattended.

CAUTION

Do not attempt to erect this popup tent

during windy conditions, or injury or damage

could occur.

MADE IN CHINA

PAGE 1
ITEM # PUT66 POP UP CANOPY TENT ITEM # PUT66 POP UP CANOPY TENT Contents: How To Disassemble: A A Tent (1 piece) B Support Rods (2 pieces) C Carry Bag (1 piece) B C 2. Push all inside side walls and gather fabric tightly. How To Assemble: 3. Roll the tent, and slide the Support Rods inside, and insert into the Carry Bag. 1. Remove contents from carry bag. 2. Pull out Middle Stem (D) on each side wall. Step inside tent, push up top ceiling panel into the shape of a pyramid. SUPPORT RODS E 1.