user manual

BT Freestyle 4500 ~ Issue 3 ~ Edition 2 ~ 07.04.04 ~ 6062
If you do not set the date, time
and day the base display will
continually flash CL.
Day, date and time
If you subscribe to your network’s Caller Display service,
the date and time are set automatically on all handsets
when your BT Freestyle 4500 receives its first call. If new
handsets are then registered to the base, they will also
receive the current date or time. However, to enable the
answer machine to ‘date stamp’ your messages, you also
have to set the day. The day has to be set manually using
a handset. The date and time can also be set manually
using a handset. If the mains power to the base is cut,
the day, date and time are lost and will need to be reset.
Setting day, date and time using a handset
1. Press MENU. Scroll to
TIME AND DATE SETTINGS and
press OK. Display shows
SET DATE & TIME . Press OK.
2. Use the keypad to enter the date, e.g.
= 3rd June. Press SAVE.
3. Enter the time e.g. = 3.30pm.
Press SAVE.
4. Press , display shows
SET DAY . Press OK.
5. Scroll until the current day is highlighted then
press SAVE.
The new time will not appear on the other handsets until
they go on line or a call is received.


0
3
5
1
6
0
3
0

Additional handset settings62
5981 BT Freestyle 4500 [3-2] 16/4/04 3:12 pm Page 62