Product Safety Guide

ENGLISH
6
For Safe Operation (Blade)
Use a mat designed specifically for this machine. The machine will not operate correctly if any other mat
is used.
Do not cut hard materials, such as metal sheets, which are incompatible with this machine. Otherwise,
damage to the machine may result.
Avoid using craft paper or fabric covered with decorative layer(s) (that can easily separate), such as lamé
or foil. Otherwise, the separated decorative layer may attach to the roller or the machine's scanning
device during operation, resulting in damage to the machine. It may also damage the cutting blade.
While the machine is operating, do not forcefully pull out or push in the mat. Otherwise, the blade or
holder may be damaged.
Do not leave material attached to the mat for a long period of time; otherwise, the adhesive will permeate
the material.
Store the mat at room temperature and in a location not exposed to high temperatures, high humidity or
direct sunlight.
Do not use aerosol sprays near the machine. The spray products may become attached to the machine,
causing damage.
Do not attach adhesive materials to any part of the mat outside of the attaching area (grid) or to the back
side of the mat. Otherwise, adhesive will become attached to the rollers, causing damage.
When attaching material to the mat, do not allow it to extend from the attaching area. Otherwise, the mat
may not be fed correctly.
If the carriage must be moved by hand in an emergency, move it slowly. Otherwise, damage to the
machine may result.
Before replacing the holder, check that the carriage is not moving.
While the machine is operating, do not unplug the power cord or remove the USB flash drive. Otherwise,
the USB flash drive may be damaged or the data may be corrupted.
Do not insert foreign objects into the DC power jack or USB port on the machine. Be sure to make space
available around them.
Do not place any objects on the operation panel. Otherwise, buttons may be accidentally pressed,
causing the machine to operate accidentally.
Only connect a USB flash drive to the USB port. Otherwise, damage to the machine may result.
Do not touch the screen while the machine is cutting, drawing or scanning.
Do not oil the machine. Otherwise, damage to the machine may result.
Do not use organic solvents, such as thinner, benzene or alcohol, to clean the machine. Otherwise, the finish
may peel off or other damage to the machine may result. Clean the machine by wiping it with a soft, dry cloth.
Do not peel off any labels (for example, the serial number label) affixed to the machine.
WARNING
Please remove protective cap from blade holder before placing it into the machine carriage. After
removing the blade holder from the machine, be sure to attach the protective cap. Do not press the tip of
the holder with your hand or fingers. Injuries may result if the blade is extended.
*
This is not a toy and is not intended to be used by children. In order to prevent choking
hazards, do not allow infants/children to put the protective caps in their mouths.