Instruction Manual for Rhinestone Starter Kit

ManualsBrandsBrother ManualsOffice SuppliesScanNCut DX Electronic Cutting Machine with 5 in. LCD Touch Screen, Grey

Table Of Contents

WARNING

• Choking Hazard. This kit contains many small parts. This kit is not intended for use by children of any age. Keep product out of the

reach of children.

• Do not touch the transfer sheet or rhinestones immediately after ironing, otherwise injury may result.

● For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.

● Do not fold or bend the template sheet, transfer sheet or backing board.

● When washing fabric with rhinestones attached, turn the garment inside out before washing. For best results, hand wash and line

dry. When using a washing machine, be sure to use a laundry wash bag. In addition, do not use a clothes dryer.

● Depending on the material and adhesive properties as well as the conditions of use, rhinestones may peel off from fabric.

● Do not store in a location exposed to direct sunlight, high temperatures or high humidity.

● The contents of this document are subject to change without notice.

● The screens in this manual are for illustration purposes only and may differ from the actual screens.

Rhinestone Starter Kit

Important Safety Instructions

Precautions

Version 0

Summary of content (6 pages)

PAGE 1
EN Rhinestone Starter Kit Important Safety Instructions WARNING • Choking Hazard. This kit contains many small parts. This kit is not intended for use by children of any age. Keep product out of the reach of children. • Do not touch the transfer sheet or rhinestones immediately after ironing, otherwise injury may result. Precautions ● ● ● ● ● ● ● 1 For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.
PAGE 2
Accessories After purchasing this kit, check the contents of the box. Store the accessories in the box. A B C D F G H I E Name A Template sheet *1 (black) 12" × 12"(305 mm × 305 mm) B Transfer sheet *1 12" × 12"(305 mm × 305 mm) C Backing board (reusable) (white) 12" × 12"(305 mm × 305 mm) D Positioning brush E Rhinestone pick-up tool F Hot fix rhinestones*2, SS20 (4.6 - 4.8 mm): clear approx.50 G Hot fix rhinestones*2, SS10 (2.8 - 2.9 mm): clear approx.800, pink approx.
PAGE 3
Activating the Rhinestone Function on CanvasWorkspace Use CanvasWorkspace to prepare a pattern for rhinestones. CanvasWorkspace has a large variety of rhinestone patterns that can be used immediately. In addition, you can create original rhinestone patterns. a From a computer, log in to CanvasWorkspace. (http://CanvasWorkspace.Brother.com) • New users should create a free account. b Click c Click . d in the upper-right corner of the Web page.
PAGE 4
Using the Rhinestone Function After activating the Rhinestone function, display details on using the function by clicking at the top of the Web page, then selecting the Help for the Rhinestone function. Download a rhinestone pattern from CanvasWorkspace, retrieve it to the machine, and cut the pattern. a b With the backing facing down, attach the template sheet to a standard tack adhesive mat, and insert the mat into the machine. c Retrieve the pattern on the machine.
PAGE 5
e Touch to ON. on the pattern editing screen, and set Half Cut h If the trial cutting of the pattern was cut properly, touch the "Start" key and cut the rhinestone pattern. • The rollers may leave marks in the template sheet, but this should not affect its quality. • Half Cut feature is only available auto-blade holder is installed. i f Touch the "Test" key, and cut a trial cutting pattern with the Auto Blade (Black Holder).
PAGE 6
l m Attach the template sheet cut to the backing board. Pour slightly more rhinestones than necessary on top of the pattern, and then use the positioning brush to position them in the holes. o p • Gently move the brush in a circular motion. • If it is difficult to position the rhinestones in the holes with the brush, use the rhinestone pick-up tool. Press the end of the rhinestone pick-up tool straight down onto a rhinestone, and then pick up the rhinestone and place it into the hole.