Instruction Manual for Printable Sticker Starter Kit

ManualsBrandsBrother ManualsOffice SuppliesScanNCut DX Electronic Cutting Machine with 5 in. LCD Touch Screen, Grey

Table Of Contents

(For inkjet printers only.)

Using this kit, you can create custom stickers printed with your inkjet printer.

Affix the laminate sheet to improve water resistance.

When attached to resin or plastic, the sticker can be peeled off and reused.

CAUTION

• When peeling off stickers with the lifter, do not place your hand or fingers in the cutting path, otherwise injuries may result if the lifter

slips.

• Do not use the lifter in any way other than how it is intended.

● Depending on the material that the printable sticker is attached to, it may not cleanly peel off.

● Do not use outdoors.

● For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.

● Do not fold or bend the printable sticker or laminate sheet.

● Do not store in a location exposed to direct sunlight, high temperatures or high humidity.

● If the stickers are exposed to direct sunlight, the ink colors may fade or the material that they are attached to may yellow.

● Affixing the laminate sheet provides water resistance; however, if the sticker is immersed in water for a long period of time, water

may seep in from the sides, causing the ink to run or the sticker to peel off.

● Do not allow the printable sticker to come into direct contact with food, etc., since the printed ink may transfer.

● Do not use in an environment at an extremely low or extremely high temperature.

● The contents of this document are subject to change without notice.

● The screens in this manual are for illustration purposes only and may differ from the actual screens.

Printable Sticker Starter Kit

About the Printable Sticker Starter Kit

Important Safety Instructions

Precautions

Version 0

Summary of content (5 pages)

PAGE 1
EN Printable Sticker Starter Kit About the Printable Sticker Starter Kit (For inkjet printers only.) Using this kit, you can create custom stickers printed with your inkjet printer. Affix the laminate sheet to improve water resistance. When attached to resin or plastic, the sticker can be peeled off and reused. Important Safety Instructions CAUTION • When peeling off stickers with the lifter, do not place your hand or fingers in the cutting path, otherwise injuries may result if the lifter slips.
PAGE 2
Accessories After purchasing this kit, check the contents. A B C D E F Name A Printable sticker*1 A4 8.3" × 11.7" (210 mm × 297 mm) B Laminate sheet*1 A4 8.3" × 11.7" (210 mm × 297 mm) C Scraper D Lifter*2 E Activation card for CanvasWorkspace Printable Sticker function F Insertion *1 These accessories are consumables. After you have used them all, purchase CAPSS1 (set containing printable stickers and laminate sheets).
PAGE 3
Activating the Printable Sticker Function on CanvasWorkspace Use CanvasWorkspace to prepare a printing image for printable stickers. CanvasWorkspace has a large variety of template images that can be printed immediately. a From a computer, log in to CanvasWorkspace. (http://CanvasWorkspace.Brother.com) • New users should create a free account. b Click c Click . d in the upper-right corner of the Web page.
PAGE 4
Using the Printable Sticker Function After activating the Printable Sticker function, click in the upper-right corner of the screen and select Help for Printable Sticker function for details on using the Printable Sticker function. Download the template image (PDF file) from CanvasWorkspace, and after printing out the sticker, follow the instructions below to cut it out using the “Direct Cut” mode of the cutting machine. a Download Printable Sticker data from CanvasWorkspace.
PAGE 5
g With the backing facing down, attach the laminated sticker to a standard tack adhesive mat. i Peel off the laminated sticker and check that its backing is not cut. • If the backing of the sticker sheet is cut, adjust the Cut Pressure (Half Cut) to lower it so that the backing is not cut. j h Select a test pattern (refer to the Operation Manual for the cutting machine), arrange the cutting pattern to avoid the printed image, and then cut out the test pattern.