Instruction Manual for Disney Vinyl Auto Blade Kit

ManualsBrandsBrother ManualsOffice SuppliesScanNCut DX Electronic Cutting Machine with 5 in. LCD Touch Screen, Grey

Table Of Contents

This kit includes a vinyl auto blade holder (with a blade installed), ideal for cutting detailed patterns. The kit also adds two functions

(Weeding Box function and Tiling function) to CanvasWorkspace (Windows/Mac). This makes it possible to create projects using

adhesive craft vinyl and iron-on transfer material as well as large projects that exceed the size of the mat.

These functions are available only with the Brother ScanNCut DX cutting machine.

WARNING

CHOKING HAZARD.

* This product contains small parts (specifically, the cap of the holder), and is not intended for use by children of any age. Keep

product out of the reach of children.

• Please remove protective cap from blade holder before placing it into the machine carriage.

• Do not press the tip of the holder with your hand or fingers because the tip of the blade will extend and may result in injuries.

● Before use, be sure to read “Useful Information” on page 14.

● The pattern collection included with the Disney vinyl auto blade kit can be downloaded with CanvasWorkspace (Web).

● For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.

● The contents of this document are subject to change without notice.

● The screens shown in this manual may differ from the actual ones.

Make the following preparations before using this kit.

1. Update the software of the cutting machine to the latest version

For detailed instructions on updating the machine, refer to the Operation Manual supplied with it.

2. Update the dedicated application CanvasWorkspace (Windows/Mac) to the latest version (ver. 2.4.0 or later)

If you do not have the application, it can be downloaded from the Brother support website (http://s.brother/cuoad/).

Vinyl Auto Blade Kit

About This Kit

Important Safety Instructions

Precautions

Preparations

Version 0

Summary of content (16 pages)

PAGE 1
EN Vinyl Auto Blade Kit About This Kit This kit includes a vinyl auto blade holder (with a blade installed), ideal for cutting detailed patterns. The kit also adds two functions (Weeding Box function and Tiling function) to CanvasWorkspace (Windows/Mac). This makes it possible to create projects using adhesive craft vinyl and iron-on transfer material as well as large projects that exceed the size of the mat. These functions are available only with the Brother ScanNCut DX cutting machine.
PAGE 2
Accessories After purchasing this kit, check the contents. The included accessories differ depending on the kit that you have purchased. A B C*2 D E*2 Part name A Vinyl Auto Blade Holder (with blade*1 installed) B Activation card for Tiling function, Weeding box function and 21 patterns C Activation card for 34 Disney patterns *2 D Pattern List E Disney Pattern List *2 *1 This accessory is a consumable. When replacing the blade, purchase Vinyl Auto Blade (CADXBLDV1).
PAGE 3
Activating the Function in CanvasWorkspace Activate the Weeding Box function and Tiling function in CanvasWorkspace (Windows/Mac). After activation, 21 patterns are added to the object panel. ■ Preparation ● ● In order to use CanvasWorkspace, a CanvasWorkspace login ID is required. If you do not have a free account, click [Create New Account] in the screen that appears after installation, and then follow the on-screen instructions to create an account.
PAGE 4
Activating the Disney Pattern Collection (only with the Disney vinyl auto blade kit) Activate the Disney pattern collection in CanvasWorkspace (Web), and then download the patterns. In order to activate the Disney pattern collection, your cutting machine must first be registered with CanvasWorkspace. For details on registering, refer to the Wireless Network Setup Guide for the cutting machine. * a The Disney pattern collection cannot be downloaded with CanvasWorkspace (Windows/Mac).
PAGE 5
About the Weeding Box Function Weeding is the process of removing the unnecessary parts around a cut pattern to leave the desired parts on the backing paper or backing film. By using the Weeding Box function, a box around patterns (weeding box) or line between patterns (weeding line) can be cut, making it easier to peel off unnecessary parts. Weeding line Weeding box The following shows the difference between weeding with and without a weeding box or weeding lines.
PAGE 6
Adding Weeding Lines and Weeding Boxes a After editing the pattern, click (Edit) on the right side of the screen.  The [Edit] Panel appears in the Control Panel. b Select the pattern, and then click [Weeding Box...].  The [Create Weeding Box] dialog box appears. c From the [Style of the Weeding Box] drop-down list, select how to specify the weeding box and weeding lines.
PAGE 7
■ [Specify the Spacing from the Selected Object] ■ [Specify the Rectangle Size]  After specifying the settings, click [OK]. d e Click [Export/Transfer FCM File] on the [File] menu. Use the desired method from the screen that appeared to transfer the cutting data to the cutting machine. For details on the transfer methods, refer to the Brother support website (http://s.brother/cfrab/).
PAGE 8
About the Tiling Function The Tiling function automatically splits cutting data larger than the mat size to fit within the specified size so that it can be transferred to the machine. This function allows you to create larger projects by joining together the cutouts from the tiled data. Memo • Data created using the Tiling function can be transferred to the machine only by using a USB flash drive.
PAGE 9
d Specify the tiling settings. 1 2 3 4 6 5 a [File Name]: Type in the name of the FCM file to be tiled. b [Tiling Size]: Select the tile (material) size. If the roll feeder will be used, select [Rolled Material] (Available only when Roll Feeder is activated.). If large data is split into many small tiles, the overall appearance may be compromised depending on the finished size or pattern. Therefore, it is recommended to specify a larger tile size.
PAGE 10
f Tiling preview screen: The tiled pattern appears as three columns according to the specified [Tiling Size] setting. The tiles are assigned file names comprised of A, B, C... (top to bottom in the tiling order) and 01, 02, 03... (left to right in the tiling order) followed by the name entered in the [File Name] box (1). The data is arranged in mats of a size appropriate for the specified [Tiling Size] setting (2).
PAGE 11
f Create a new folder in the USB flash drive, and then select the folder to save the tiled data. Memo • When saving tiled data, be sure to create a folder on a USB flash drive, and then save the data in the folder. Do not delete data created in the folder or change the name of a file. • If the folder already contains a file with the same name, the data in the folder will be automatically overwritten. g Insert the USB flash drive into the USB port (for a USB flash drive) on the cutting machine.
PAGE 12
Troubleshooting If this product stops operating correctly, check the following possible problems as well as the Brother support website (http:// s.brother/cpoac/) before requesting service. If the problem persists, contact Brother Customer Service or a Brother authorized service center. Cutting machine Symptom Not all of the tiled data is displayed in the machine’s screen when being retrieved. The data for multiple tiled patterns are mixed together in one folder. The “Start” key is not available.
PAGE 13
Error Messages The following table lists some of the messages that may appear while the machine is operating as well as their corresponding solutions. Perform the necessary operation according to the instructions in the message or the solution described here. If the problem persists, contact Brother Customer Service or a Brother authorized service center. Cutting Machine Error Messages Error Messages This holder cannot be used.
PAGE 14
Useful Information Examples of Materials That Can Be Used Adhesive craft vinyl This adhesive-backed sheet material is used to decorate signboards, window glass, walls or vehicles. The material consists of two layers: an adhesive-backed sheet and backing (paper or film). After using the cutting machine to cut out your pattern, such as text or a logo, from only the adhesive-backed layer, attach the pattern directly onto the wall, vehicle or other surface.
PAGE 15
Iron-On Transfer Material Iron-on transfer material is used for heat transferring patterns onto fabric such as T-shirts and sweatshirts. The material consists of two layers: a thermo-softening adhesive sheet and carrier sheet (paper or film). After using the cutting machine to cut out your pattern, such as text or a logo, from only the thermo-softening adhesive sheet, attach the pattern to the target surface by pressing down on the backing with a heat press or iron.
PAGE 16
About Vinyl Auto Blade Patterns After the kit has been activated, 21 new patterns are added to CanvasWorkspace (Windows/Mac). Some of the added patterns have been designed to make use of the new features. Read about the following features for reference when creating your project. ■ Patterns with a weeding box The following patterns already have a weeding box added so that unnecessary parts can easily be peeled off after being cut.