Product Safety Guide HL-B2050DN / HL-B2000D / HL-2595DW / DCP-B7500D / DCP-7090DW / DCP-L2535DW / DCP-B7520DW / DCP-B7530DN / DCP-7190DW / DCP-L2550DW / DCP-B7535DW / DCP-7195DW / MFC-B7700D / MFC-B7720DN / MFC-7895DW Brother Industries, Ltd. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Read this guide before attempting to operate the product, or before attempting any maintenance.
Table of Contents Symbols and Conventions Used in the Documentation............................................ 3 Compilation and Publication Notice ............................................................................ 3 Choose a Safe Location for Your Product .................................................................. 4 Connect the Product Safely.......................................................................................... 7 Use the Product Safely .................................
Symbols and Conventions Used in the Documentation The following symbols and conventions are used throughout the documentation. Follow all warnings and instructions marked on the product. WARNING Hot Surface icons warn you not to touch product parts that are hot. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries.
Choose a Safe Location for Your Product WARNING Choose a location where the temperature remains between 10°C and 32°C, the humidity is between 20% and 80%, and where there is no condensation. To ensure the high print quality, the maximum ambient temperature we recommend is 32°C. The maximum ambient temperature to safely use this machine is 35°C. DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water.
DO NOT put the product in a location that blocks or obstructs any slot or opening in the product. These slots and openings are provided for ventilation. Blocking the machine's ventilation could create a risk of overheating and/or fire. Instead: • Keep a minimum gap around the product as shown in the illustration. Products without scanning function 100 mm 120 mm 100 mm Products with scanning function 250 mm 100 mm 100 mm • Place the product on a solid level surface.
CAUTION Put your product on a flat, level, stable surface (such as a desk), that is free from vibration and shocks. Put the product near a telephone socket (MFC models only) and a standard grounded electrical socket. DO NOT place this product on an unstable cart, stand, or table, particularly if children are expected to be near the product. The product is heavy and may fall, causing injury to you or others and serious damage to the product.
Connect the Product Safely WARNING ELECTRICAL HAZARDS Failure to follow the warnings in this section may create the risk of an electrical shock. In addition, you could create an electrical short, which may create the risk of a fire. There are high-voltage electrodes inside the product.
DO NOT dismantle this product. Dismantling this product could cause a fire or electrical shock. DO NOT attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltage points and other risks and may void your warranty. Refer all servicing to Brother customer service or your local Brother dealer. DO NOT drop any metallic hardware or any type of liquid on the power plug of the product. It may cause an electrical shock or a fire.
DO NOT use this product during a thunderstorm. There may be a remote risk of an electrical shock from lightning. DO NOT put toner cartridges or a toner cartridge and drum unit assembly into a fire or places susceptible to fire. It could explode, resulting in injuries. FIRE HAZARDS Failure to follow the warnings in this section may create the risk of a fire.
(Models with Wireless LAN function only) DO NOT use the product near any medical electrical equipment. The radio waves emitted from the product may affect medical electrical equipment and cause a malfunction, which may result in accident or injury. For users with pacemakers: This product generates a weak magnetic field. If you feel anything wrong with the operation of your pacemaker when near the product, move away from the product and consult a doctor immediately.
(MFC models only) Use caution when installing or modifying telephone lines. Never touch telephone wires or terminals that are not insulated unless the telephone line has been unplugged from the wall socket. Never install telephone wiring during a thunderstorm. Never install a telephone wall socket in a location that is wet or may become wet, for example, near a refrigerator or other appliance that produces condensation. Power Cord Safety: • This product is equipped with an earthed plug.
(Products with scanning function only) To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations. For your safety, unplug the product from the electrical socket when it is not used for a long time. When multiple devices, including this product, are connected to a computer using USB cables, you may feel an electric charge when you touch metal parts of the product. Some products and/or their cartons contain a silica gel pack.
Should you come into contact with toner, follow these instructions: • Inhalation Obtain immediate medical attention. In case of accidental inhalation, move to fresh air immediately, then obtain medical attention. • Skin contact Remove contaminated clothing immediately and wash affected skin with plenty of water or soap and water. • Eye contact Obtain medical attention. If the toner has got into the eyes, immediately wash out the eyes with water continuously, for at least 15 minutes.
• DO NOT put objects on top of the product. Doing so may cause the product to malfunction. • If the product does not operate normally when the operating instructions are followed, adjust only those controls that are covered by the operating instructions. Incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. Important Safety Instructions 1.
• If the product has been dropped or the casing has been damaged. • If the product exhibits a distinct change in performance, indicating a need for service. WARNING For protection against the risk of electrical shock, always disconnect all cables from the wall outlet before servicing, modifying or installing the equipment. IMPORTANT • This equipment may not be used on coin service lines provided by the telephone company or connected to party lines.
Only use the power cord supplied with this product (if included in the box). Disconnect device This product must be installed near an electrical socket that is easily accessible. In case of an emergency, you must unplug the power cord from the electrical socket to shut off the power completely. Approval Information (MFC Models Only) THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE FITTED WITH THE APPROPRIATE CONNECTOR.
Notes on Using the Wireless Network Models 1. For Wireless LAN Function of the Equipment • Operating frequency: 2.4 - 2.4835 GHz • Equivalent isotropic radiated power (EIRP): ≤ 100 mW • Maximum power spectral density: ≤ 10 dBm / MHz (EIRP) • Carrier frequency tolerance: 20 ppm • Out-of-band emission power (Outside the 2.4 to 2.4835 GHz frequency band) ≤ -80 dBm / Hz (EIRP) • Spurious emission (radiation) power (Outside the range of the corresponding carrier ± 2.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Apple, Macintosh, and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. AirPrint and the AirPrint logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Wi-Fi is a registered trademark of Wi-Fi Alliance®. Android is a trademark of Google Inc. Google Play is a trademark of Google Inc.
©2008 Devicescape Software, Inc. All rights reserved. This product includes the “KASAGO TCP/IP” software developed by ZUKEN ELMIC, Inc. Copyright 1989-2014 Datalight, Inc., All Rights Reserved. FlashFX® Copyright 1998-2014 Datalight, Inc. U.S.Patent Office 5,860,082/6,260,156 Unlawful Use of Copying Equipment (Products with scanning function only) It is an offence to make reproductions of certain items or documents with the intent to commit fraud.
Month of publication: 03/2020 CHN-ENG Version B
